Abstract:A 13-bit 8 MSample/s high-accuracy CMOS pipeline ADC is proposed. At the input, the sample-and-hold amplifier (SHA) is removed for low power and low noise; meanwhile, an improved sampling circuit is adopted to alleviate the clock skew effect. On-chip bias current is programmable to achieve low power dissipation at different sampling rates. Particularly, drain-to-source voltages in the operational amplifiers (opamps) are fixed to ensure high DC gain within the variant range of the bias current. Both on-chip and off-chip decoupling capacitors are used in the voltage reference circuit in consideration of low power and stability. The proposed ADC was implemented in 0.18-mu m 1P6M CMOS technology. With a 2.4-MHz input, the measured peak SNDR and SFDR are 74.4 and 91.6 dB at 2.5 MSample/s, 74.3 and 85.4 dB at 8.0 MSample/s. It consumes 8.1, 21.6, 29.7, and 56.7 mW (including I/O drivers) when operating at 1.5, 2.5, 5.0, and 8.0 MSample/s with 2.7 V power supply, respectively. The chip occupies 3.2 mm(2), including I/O pads.

Sample-hold Circuit and Stage Circuits in a Traditional 12-B 80-Msample/s Pipelined A/D Converter.

A Low Power Sample-and-Hold Circuit for Pipelined A/D Converter

A sample and hold circuit for high speed ADCs

Optimization Of Sample/Hold Circuit For High-Speed And High-Resolution Adcs

Low power design for 14-bit 100MSPS pipelined ADC

Design of a High-Speed Sample-and-hold Circuit Using a Substrate-Biasing-effect Attenuated T Switch

Design of a Novel 8-Bit 0.35-&Amp;#x00b5;m BiCMOS Pipelined ADC

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A Sample/Hold Circuit for Low-Power High-Resolution A/D Converters

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

A 10-bit 30-MS/s 50mW pipelined A/D converter

A 1.2V Sample-and-Hold Circuit for 14-Bit 250MS/s Pipeline ADC in 65nm CMOS

A 13-Bit, 8 Msample/S Pipeline A/D Converter

A SHA-less 12-bit 200-MS/s pipeline ADC

Low Power Pipelined A/D Converter in 0.6 Μm Technology

A Low Power 12-Bit 20msamples/s Pipelined Adc

A Cost-Efficient 12-Bit 20msamples/s Pipelined Adc

A 18 Mw 12 Bit 50 Ms/S Sha-Less Pipelined Adc

A 12-Bit 800ms/s Pipelined A/D Converter.

An 8-bit 100-MS/s pipelined ADC without dedicated sample-and-hold amplifier

A 12-Bit, 270ms/S Pipelined Adc With Sha-Eliminating Front End