Abstract:This article presents a 14-bit 200-Ms/s pipelined analog-to-digital converter (ADC) for wide input frequency range. The ADC adopts a sample-and-hold amplifier-less (SHA-less) 3.5-bit front-end stage. A dedicated path combining architecture is proposed for the flash sub-ADC-based pipeline ADC to reduce the aperture error, and expand the ADC input frequency up to 490 MHz under 200-Ms/s sampling rate. To further improve the accuracy and reduce power, the sampling capacitor splitting and comparator interpolation techniques are used in the first stage. The proposed ADC has been designed and fabricated in a 180-nm CMOS technology with an area of 2.43 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> including ADC core, the biasing, and the calibration circuit. The measured signal to noise and distortion ratio (SNDR) is 70.6 and 65.6 dB for 30- and 385-MHz inputs, respectively. The SNDR remains 63.1 dB for 490-MHz input. The ADC core consumes 112-mW power under 1.8-V supply. The measured effective resolution bandwidth (ERBW) is about 250 MHz, and the Walden figure of merit (FoM) defined at the ERBW is 116 fJ/conversion-step.

A 12-Bit, 270ms/S Pipelined Adc With Sha-Eliminating Front End

Low power design for 14-bit 100MSPS pipelined ADC

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A 14-Bit 500-Ms/S Sha-Less Pipelined Adc In 65nm Cmos Technology For Wireless Receiver

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 12-bit 400-MS/s SHA-less pipelined ADC

A Low Power 12-Bit 20msamples/s Pipelined Adc

Design of a Novel 8-Bit 0.35-&Amp;#x00b5;m BiCMOS Pipelined ADC

A 18 Mw 12 Bit 50 Ms/S Sha-Less Pipelined Adc

A Cost-Efficient 12-Bit 20msamples/s Pipelined Adc

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 10-bit 30-MS/s 50mW pipelined A/D converter

A Improved Frontend for High-Speed Sha-Less Pipelined Adc

A 12-Bit 40-Ms/s SHA-less Pipelined ADC Using a Front-End RC Matching Technique

A 12-Bit 2-Gs/s Pipelined ADC Front-End Stage with Aperture Error Tuning and Split MDAC

14-Bit 100 Ms/S 121 Mw Pipelined Adc

A 14-bit 200-Ms/s SHA-Less Pipelined ADC With Aperture Error Reduction

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A High-Linearity Pipelined ADC with Opamp Split-Sharing in a Combined Front-End of S/H and MDAC1