Abstract:This paper presents a power-efficient, high-linearity pipelined ADC, utilizing a combined front-end of the sample/hold circuit (S/H) and the first multiplying digital-to-analog converter (MDAC1). In contrast with the conventional merged sample-and-hold amplifier (SHA) and first MDAC, the front-end uses an opamp split-sharing scheme to meet the different gain and bandwidth requirements of both the S/H and the first MDAC. This opamp split-sharing scheme mitigates the memory effect without a dedicated clock phase and avoids crosstalk. In the back-end ADC, 4.5-bit opamp-sharing MDACs with four-input operational trans-conductance amplifiers (OTAs) are used for further power saving. Implemented in a 0.18-mu m CMOS process, the 14-bit ADC achieves a spurious-free dynamic range (SFDR) of 89.1 dB and a signal-to-noise plus distortion ratio (SNDR) of 70.2 dB, with a sampling rate of 100 MS/s and an input of 15.5 MHz. For input signals up to 220 MHz, measured SFDR and SNDR are maintained above 82.7 dB and 66.2 dB, respectively. The ADC consumes 92 mW with a 1.8-V supply, occupying an area of 6.3 mm(2).

A 18 Mw 12 Bit 50 Ms/S Sha-Less Pipelined Adc

A Low Power Sample-and-Hold Circuit for Pipelined A/D Converter

Low power design for 14-bit 100MSPS pipelined ADC

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A 14-Bit 500-Ms/S Sha-Less Pipelined Adc In 65nm Cmos Technology For Wireless Receiver

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 12-Bit, 270ms/S Pipelined Adc With Sha-Eliminating Front End

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A 10-bit 30-MS/s 50mW pipelined A/D converter

A sample and hold circuit for high speed ADCs

A 10-bit 20-Msample/s 49mW CMOS pipelined A/D converter

A Low Power 12-Bit 20msamples/s Pipelined Adc

A 12-Bit 40-Ms/s SHA-less Pipelined ADC Using a Front-End RC Matching Technique

A 12-bit 400-MS/s SHA-less pipelined ADC

An 8-bit 100-MS/s pipelined ADC without dedicated sample-and-hold amplifier

A 12-bit 50-MSPS SHA-less opamp-sharing Analog-to-Digital converter in 65nm CMOS

A 8-bit 125-MSample/s pipelined ADC

A 1.8-V 11-Bit 40-Ms/s 21-Mw Pipelined ADC

A Cost-Efficient 12-Bit 20msamples/s Pipelined Adc

An 85mw 14-Bit 150ms/s Pipelined ADC with a Merged First and Second MDAC

A High-Linearity Pipelined ADC with Opamp Split-Sharing in a Combined Front-End of S/H and MDAC1