Abstract:Highlights Improving the wear resistance of soil-engaging components is an urgent need for the agricultural machinery industry. Sandfish ( Scincus scincus ) epidermis with exceptional wear resistance was selected as a bionic prototype. By adopting a bionic engineering approach, a novel bioinspired microthorn scale surface was designed and prepared. Numerical simulations were performed with EDEM to investigate the wear resistance mechanism. Abstract . To solve the problem of abrasive wear failure of the soil-engaging components of agricultural machinery, the imbricated microthorn scale structure of the sandfish (Scincus scincus) epidermis surface was selected as a bionic prototype. By adopting a bionic engineering approach, nine bionic microthorn scale surface specimens with different geometric structure parameters were designed and prepared. Wear resistance tests were performed in a rotating abrasive wear testing system. The results of the wear tests showed that the imbricated microthorn scale structured surfaces had substantially less abrasion loss than a conventional smooth surface. The influence of the geometric structure parameters on the wear performance was also identified. Numerical simulations were performed to explore the wear resistance mechanism of the imbricated microthorn scale structured surfaces. The abrasion of the bionic surfaces mainly occurred at the edge of the microthorn that faced the abrasive particle flow. The trajectory of subsequent abrasive particle flow was modified by the large dispersion of particle flow; hence, the number of particles that impacted the surface decreased. Therefore, the wear resistance performance of the bionic surfaces was enhanced. This bioinspired surface can provide a technical reference to mitigate the abrasive wear failure of the soil-engaging components of agricultural machinery. Keywords: Abrasive wear, Archard wear, Bionic design, Discrete element method, Scale surface.

Two-body Abrasive Wear of the Surfaces of Pangolin Scales

Analysis of Wear-Resistant Surface with Pangolin Scale Morphology by DEM Simulation

Geometric shape and performance of the scale of the pangolin

Abrasive Wear of Embossed Surfaces with Convex Domes

Abrasive wear behavior of Sialon ceramic

Two-Body Abrasive Wear of the Outside Shell Surfaces of Mollusc Lamprotula Fibrosa Heude, Rapana Venosa Valenciennes and Dosinia Anus Philippi

Effect of Surface Morphology and Internal Structure on the Tribological Behaviors of Snake Scales from Dinodon rufozonatum

Study of dry sliding friction and wear behavior of bionic surface of hardened steel

Bioinspired Imbricated Microthorn Scale Surfaces and their Abrasive Wear Performance

Effects of surface morphology and chemical composition on friction properties of Xenopeltis hainanensis scales

Abrasive Wear Behaviour of Bamboo

Experimental Investigation On Anti-Wear Of A Bionic Non-Smooth Surface Made By Laser Texturing

Experimental Investigation on Anti-wear of ABionic Non-smooth Surface Made by LaserTexturing

The Tribological Adaptability for Ventral Scales of Dinodon Rufozonatum in Dry/Wet/Rough Environments

A study of the mechanisms of abrasive wear for ductile metals under wet and dry three-body conditions

Contact Analysis of Abrasive Wear

Abrasive Wear Behavior of an Enamel Coating

A wear tester capable of monitoring and evaluating the movement pattern of abrasive particles in three-body abrasion

The effect of biomimetic laser surface treatment on the wear performance of high manganese steel

Gas–Solid Erosive Wear of Biomimetic Pattern Surface Inspired from Plant

Dry sliding wear behaviour of bamboo