Abstract:The effect of mesh, turbulence model and discretization scheme in Reynolds-averaged Navier-Stokes method (RANS) on a stall inception eigenvalue approach is investigated in a transonic compressor rotor. The most influencing flow structures on the result of eigenvalue approach are also identified. The compressor stall point is calculated by a recently developed eigenvalue model. Based on the 3D Navier-Stokes equations, the body-force term and small disturbance were used to transform the original equations into the eigenvalue approach. Because the eigenvalue mainly relies on the results from RANS, the sensitivity of the eigenvalue to the mesh density, turbulence model, and numerical scheme needs to be clearly identified before it is applied to engineering. The effect of mesh density is firstly specified. Several grids with different densities and distributions are employed in RANS. The eigenvalue results indicate that the solution converges at the same grid density as RANS does. Besides, the eigenvalue approach has the ability to predict a more accurate stall point compare to RANS with a coarse computational grid. The investigation of the detailed flow field indicates that the flow structures in the vicinity of blade tip region change significantly with three different grid densities, the eigenvalue is also influenced. Two important flow mechanisms are found to be the decisive factors for the eigenvalue, namely the blockage generated by the shock-vortex interaction, the separated flow and the wake near the trailing edge. These flow patterns are consistent with the flow mechanisms of the compressor stall inception. Further investigations are conducted with four different turbulence models combined with three different spatial discretization schemes. Calculated eigenvalue proves that the turbulence model changes the eigenvalue with an over-prediction of stall point at about 1%. The spatial discretization scheme has small effect on stall point prediction using k-ε and SA models, whereas it has large effect when using SST model. The scheme shows great influence in the simulations with specific turbulence model by changing the predicted stall point at least 1.7%. The existence of blockage, the separation and the wake flow are identified as the major and secondary factor which contributes to an unstable prediction of eigenvalue approach, respectively.

The Influence of Inlet Disturbances on the Post-Stall Behaviors in Compression System

NUMERICAL INVESTIGATION OF STATOR CLOCKING EFFECTS ON THE DOWNSTREAM STATOR IN A 1.5-STAGE AXIAL TURBINE

Impact of Inlet Flow Angle Variation on the Performance of a Transonic Compressor Blade Using NIPC

Performance Impact of Uncertain Variations of Inlet Flow for Axial Compressor Blades

Nonlinear Instability of Axial Flow Compression Systems

STUDY ON THE POST-STALL BEHAVIOR OF AN AXIAL-FLOW COMPRESSION SYSTEM

A High-Order Model For Spike-Type Instability In Axial Compression Systems

Computational Model for Stall Inception and Nonlinear Evolution in Axial Flow Compressors

Calculation of Flow Instability Inception in High Speed Axial Compressors Based on an Eigenvalue Theory

Effects of rotating inlet distortion on the stall mechanism of an axial flow compressor

The Investigation of Axial Compressor With Aggressive Flow Path Near Stall Condition

A Parametric Study of Circumferential Range of Inlet Distortions on Transonic Rotor Stall Process

A Study of Influences of Inlet Total Pressure Distortions on Clearance Flow in an Axial Compressor

Experimental Investigation and System Simulation Analysis for the Aerodynamic Performance of a Two-Stage Axial Compressor with Inlet Dynamic Distortion

Effect Of Rans Method On The Stall Onset Prediction By An Eigenvalue Approach

Stall Inception Measurements in a High-Speed Multistage Compressor

Effect of RANS Method on Stall Inception Eigenvalue Approach

Research on Stall Mechanism Based on Vorticity Dynamics in a Single-Rotor Axial Compressor

Numerical Investigation of Influence of Rotor/stator Interaction on Blade Boundary Layer Flow in a Low Speed Compressor

Numerical investigation on short length-scale disturbance generation in an eccentric axial compressor rotor at a stable condition

Aerodynamic Instabilities of Swept Airfoil Design in Transonic Axial-Flow Compressors