Abstract:NbMoTaW refractory high entropy alloy (RHEA) possesses superior high temperature mechanical strength while the very low plastic strain at room temperature limits its practical applications. In present work, the method of adjusting composition was employed to improve the mechanical properties of (NbTaW)1-xMox (x=0, 0.05, 0.15, 0.25) alloys especially the plasticity at room temperature by the combination of experiments and first-principles calculations. Phase composition of the (NbTaW)1-xMox alloys identified using experiments and theoretical prediction were all single-phase solid solution. Microstructure and elements distribution of the alloys were characterized by SEM and EDS. All the as-casted alloys had dendrite structures and the grain size firstly increased (x<15) and then decreased (x>15) with the increase of Mo content. The compressive properties and the analysis of fracture surface demonstrated that strength and ductility of (NbTaW)1-xMox alloys were obviously enhanced with the decrease of Mo content. NbTaW MEA had the maximum mechanical strength (1460 MPa) and ductility (16.2%) in the designed alloys. Both the mechanical strength and plasticity at room temperature were greatly improved compared with that of NbMoTaW RHEA. The experimental results well agreed with that of first-principles calculations. The elastic anisotropy and microhardness of these alloys were also predicted. The orders of elastic anisotropy were (NbTaW)0.75Mo0.25 < (NbTaW)0.85Mo0.15 < (NbTaW)0.95Mo0.05 < NbTaW. The hardness of (NbTaW)1-xMox alloys were increased with increasing of Mo content. Optimizing composition was demonstrated to be an effective method to improve the mechanical properties of NbMoTaW refractory high entropy alloy.

First-principles calculations of elastic moduli of Ti–Mo–Nb alloys using a cluster-plus-glue-atom model for stable solid solutions

First Principles Studies on the Elastic, Thermodynamic Properties and Electronic Structure of Ti15−xMoxSn Compounds

Ab Initio Study of the Elastic Properties of Body-Centered Cubic Ti-Mo-based Alloys

Influence of Nb and Mo Contents on Phase Stability and Elastic Property of Β-Type Ti-X Alloys

First-principles calculations for development of low elastic modulus Ti alloys

First principles study of low Young's modulus Ti–Nb–Zr alloy system

Mechanical performance of (NbTaW)1−xMox (x = 0, 0.05, 0.15, 0.25) refractory high entropy alloys: Perspective from experiments and first principles calculations

Study of low-modulus biomedical β Ti–Nb–Zr alloys based on single-crystal elastic constants modeling

First-principles Prediction of Ductility in Β -Type Ti-Mo Binary Alloys

First-principles Investigation on Phase Stability and Elastic Properties of beta-Ti1-x-y-zNbxZrySnz Alloys

First-principles calculations to investigate phase stability, elastic and thermodynamic properties of TiMoNbX (X=Cr, Ta, Cr and Ta) refractory high entropy alloys

Modeling of Alloying Effect on Elastic Properties in BCC Nb-Ti-V-Zr Solid Solution: from Unary to Quaternary

Elastic behavior of binary and ternary refractory multi-principal-element alloys

Cluster-formula-embedded machine learning for design of multicomponent β-Ti alloys with low Young’s modulus

Investigation of the Chemical Composition, Microstructure, Density, Microhardness, and Elastic Modulus of the New β Ti-50Nb-xMo Alloys for Biomedical Applications

First-principles Study the Phase Stability and Mechanical Properties of Binary W-Mo Alloys

A Comparative Study on Microstructure and Mechanical Properties of Ti-43/46Al-5Nb-0.1B Alloys Modified by Mo

First-principles Calculations of the Site Preference, Phase Stability and Brittle Versus Ductile Behaviors of TiAl Intermetallic Alloyed with Ternary Elements

First-Principles Study on Free Energy and Elastic Properties of Disordered Β-Ti1-xnbx Alloy: Comparison Between SQS and CPA

Titanium alloying enhancement of mechanical properties of NbTaMoW refractory high-Entropy alloy: First-principles and experiments perspective

First-principles Investigation on Alloying Effect of Nb and Mo in Γ-Tial