Abstract:NbMoTaW refractory high entropy alloy (RHEA) possesses superior high temperature mechanical strength while the very low plastic strain at room temperature limits its practical applications. In present work, the method of adjusting composition was employed to improve the mechanical properties of (NbTaW)1-xMox (x=0, 0.05, 0.15, 0.25) alloys especially the plasticity at room temperature by the combination of experiments and first-principles calculations. Phase composition of the (NbTaW)1-xMox alloys identified using experiments and theoretical prediction were all single-phase solid solution. Microstructure and elements distribution of the alloys were characterized by SEM and EDS. All the as-casted alloys had dendrite structures and the grain size firstly increased (x<15) and then decreased (x>15) with the increase of Mo content. The compressive properties and the analysis of fracture surface demonstrated that strength and ductility of (NbTaW)1-xMox alloys were obviously enhanced with the decrease of Mo content. NbTaW MEA had the maximum mechanical strength (1460 MPa) and ductility (16.2%) in the designed alloys. Both the mechanical strength and plasticity at room temperature were greatly improved compared with that of NbMoTaW RHEA. The experimental results well agreed with that of first-principles calculations. The elastic anisotropy and microhardness of these alloys were also predicted. The orders of elastic anisotropy were (NbTaW)0.75Mo0.25 < (NbTaW)0.85Mo0.15 < (NbTaW)0.95Mo0.05 < NbTaW. The hardness of (NbTaW)1-xMox alloys were increased with increasing of Mo content. Optimizing composition was demonstrated to be an effective method to improve the mechanical properties of NbMoTaW refractory high entropy alloy.

First-principles Prediction of Ductility in Β -Type Ti-Mo Binary Alloys

First Principles Studies on the Elastic, Thermodynamic Properties and Electronic Structure of Ti15−xMoxSn Compounds

First-principles Study the Phase Stability and Mechanical Properties of Binary W-Mo Alloys

First-principles Calculations of the Site Preference, Phase Stability and Brittle Versus Ductile Behaviors of TiAl Intermetallic Alloyed with Ternary Elements

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

Influence of Nb and Mo Contents on Phase Stability and Elastic Property of Β-Type Ti-X Alloys

Ab Initio Study of the Elastic Properties of Body-Centered Cubic Ti-Mo-based Alloys

Site preference and brittle–ductile transition mechanism of B2-NiAl with ternary elements additions form first-principles calculations

Design of Cu–Cr Alloys with High Strength and High Ductility Based on First-Principles Calculations

Phase Stability, Mechanical Properties and Electronic Structures of TiAl Binary Compounds by First Principles Calculations

Phase stability, mechanical properties and electronic structure of TiAl alloying with W, Mo, Sc and Yb: First-principles study

First-principles Investigation of Phase Stability and Effects on Ductility for MoSi2 Alloyed by Al and Nb

Comparative Investigation on the Stability, Electronic Structures and Mechanical Properties of Mo2FeB2 and Mo2NiB2 Ternary Borides by First-Principles Calculations

Enhanced Strength and Ductility in Ti46Al4Nb1Mo Alloys Via Boron Addition

First-principles calculations for development of low elastic modulus Ti alloys

First-principles Investigation on Alloying Effect of Nb and Mo in Γ-Tial

Origin of the Ductile-to-brittle Transition of Metastable Β-Titanium Alloys: Self-hardening of Ω-Precipitates

Martensitic transformation, mechanical and magnetic properties of Ni-Cu-Mn-Ti-(B) Heusler alloys by first-principles investigations

Effect of Composition on Mechanical Properties of Pt-based Binary and Ternary Alloys: A First-Principles Study

A Comparative Study on Microstructure and Mechanical Properties of Ti-43/46Al-5Nb-0.1B Alloys Modified by Mo

Mechanical performance of (NbTaW)1−xMox (x = 0, 0.05, 0.15, 0.25) refractory high entropy alloys: Perspective from experiments and first principles calculations