Abstract:A theoretical foundation for selecting corrosion-resistant materials is necessary to address the corrosion risks in complex oil and gas fields and tubing for CO 2 capture, utilization, and storage (CCUS). To achieve this, experiments were conducted using actual oilfield simulated formation water as the corrosive medium. Weight-loss corrosion tests and surface analysis methods were employed to investigate and compare the corrosion of four steel materials (C110, 3Cr, 5Cr, and 9Cr) in high mineralization, CO 2 , and trace H 2 S coexistence environments. The results show that all materials experience CO 2 -dominated corrosion under CO 2 and trace H 2 S conditions, with corrosion rates exceeding the controlled limit for oilfields (0.076 mm/y). The corrosion severity is classified as extremely severe, and the corrosion products mainly comprise a mixed carbonate of FeCO 3 and CaCO 3 . Both uniform and localized corrosion rates decrease gradually with increasing chromium content in the materials. The experimental study demonstrates that chromium has good corrosion resistance. The morphology of the corrosion product film transitions from irregular particles to rhombohedral blocks or flakes with increased chromium content. Carbon steel primarily forms Fe x Ca 1-x CO 3 corrosion products with a small amount of Fe 2 O 3 inclusion, while corrosion products in chromium-containing steel include Cr 2 O 3 , Cr(OH) 3 , Fe x Ca 1-x CO 3 , and Fe 2 O 3 . As the chromium content in the steel material increases, the content of Ca and Cl elements in the corrosion product film gradually decreases. These findings provide valuable insights into the corrosion behavior of different steel materials under the challenging conditions of high mineralization, CO 2 -rich, and trace H 2 S environments. They contribute to the theoretical basis for selecting suitable corrosion-resistant tubing materials for oil and gas operations, including CCUS, enabling the industry to mitigate corrosion risks effectively.

Effect of the Frequency of High-Angle Grain Boundaries on the Corrosion Performance of 5wt%cr Steel in a CO 2 Aqueous Environment

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Effects of Cooling Rate on the Precipitation Behavior of Grain Boundary Carbide and Corrosion Resistance of 5cr15mov Stainless Steel

Effect of Cr and isothermal holding temperature on microstructure and properties of complex phase steel with high formability (CH steel)

Investigating the effect of Cr content on the microstructure and electrochemical measurement of low alloy steel

High-Temperature Mechanical Properties of Artificially Simulated Corroded Q500MC Structural Steel

Effect of alloyed Cr on corrosion behavior of low‐alloy steel in wet atmosphere

Effect of Chromium and Water Vapor of Low Carbon Steel on Oxidation Behavior at 1050 °C

The effect of tempering temperature on the microstructure and electrochemical properties of a 13wt.% Cr-type martensitic stainless steel

Corrosion Behavior of Ultrafine-Grained CoCrFeMnNi High-Entropy Alloys Fabricated by High-Pressure Torsion

Corrosion of Alloy Steels Containing 2% Chromium in CO2 Environments

Importance of cold rolling and tempering on the microstructure evolution, precipitation behavior and mechanical responses of 9Cr3Co3W1Cu ferritic/martensitic steel

Insights into the Superior Stress Corrosion Cracking Resistance of FeCrAl Alloy in High Temperature Hydrogenated Water: the Critical Role of Grain Boundary Oxidation

Effect of Hot Deformation Process Parameters on Microstructure and Corrosion Behavior of 35crmov Steel

Effect of carbon content on microstructure,mechanical properties and intergranular corrosion resistance of 0 Cr25 Ni35 AlTi alloy

Effect of Tempering Temperature on the Aqueous Corrosion Resistance of 9Cr Series Heat-Resistant Steel

Unraveling the Impact of Cr Content on the Corrosion of Tubing Steel in High CO2 and Low H2S Environments

Atomic Insights into the Corrosion Behavior of Fe-Cr Alloys in Supercritical CO2 Environment

Effects of tempering temperature on the precipitation behaviors of nanoparticles and their influences on the susceptibility to hydrogen embrittlement of a Cr–Mo–V steel

Effect of Heat Treatment on the Passive Film and Depassivation Behavior of Cr-Bearing Steel Reinforcement in an Alkaline Environment

A High-Resolution Study of the Different Surface State Effects on the Corrosion Behaviors of a Ferritic Steel and an Austenitic Steel in Supercritical Water