Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Synthetic turf finite element model development and validation

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

Modeling of Unsaturated Granular Materials in Flexible Pavements

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Modeling Stress-Dependent Anisotropic Elastoplastic Unbound Granular Base in Flexible Pavements

Inverse Engineering Stress-Dependent Resilient Moduli of Cement-Treated Base Materials in Asphalt Pavements Using Falling Weight Deflectometer

A Mechanistic-Empirical Approach to Quantify the Influence of Geogrid on the Performance of Flexible Pavement Structures

Skin friction related behaviour of artificial turf systems

An in Vivo Experimental Validation of a Computational Model of Human Foot

The Tribological Behaviour of Skin Equivalent Materials and Ex-Vivo Human Skin During Sliding Contact with Artificial Turf

Development, calibration and validation of impact-specific cervical spine models: A novel approach using hybrid multibody and finite-element methods

OPTIMAL MESH CRITERIA IN FINITE ELEMENT MODELING OF HUMAN FOOT: THE DEPENDENCE FOR MULTIPLE MODEL OUTPUTS ON MESH DENSITY AND LOADING BOUNDARY CONDITIONS

A Finite Element Model to Investigate the Stability of Osteochondral Grafts Within a Human Tibiofemoral Joint

A finite element model for predicting impact-induced damage to a skin simulant

Predicting the mechanical properties of semi-flexible pavement material with micromechanical modeling

Finite Element Method-Based Skid Resistance Simulation Using In-Situ 3D Pavement Surface Texture and Friction Data

The Use of Finite Element Analysis to Enhance Research and Clinical Practice in Orthopedics

A laboratory method to measure deformation of baseball infield soil surfaces using cleated footwear

A Finite Element Model for Simulating Stress Responses of Permeable Road Pavement

Definition and evaluation of a finite element model of the human heel for diabetic foot ulcer prevention under shearing loads