Abstract:Small-scale models have been commonly utilized in testing of performance of active mass driver (AMD) control systems. The utmost reason is that physical testing of AMD system at full scale is usually too expensive to afford, as well as hard to implement on site. With reference to the real-time hybrid simulation technology, a real-time AMD subsystem testing method is proposed in this paper. In this method, the entire system is composed of AMD as physical subsystem and target structure as numerical subsystem. The physical test is conducted on AMD subsystem, whereas the numerical simulation is carried out on the structure subsystem. Meanwhile, the real-time data are being communicated between these two subsystems. This method is then applied to the performance validation of a novel AMD control system, which is driven by a linear motor. In the test, a benchmark three-storey frame structure is employed as the numerical subsystem, and earthquake excitations are used as the external input. On the basis of a series of tests, both the time history and the statistical criteria show that the results of AMD subsystem and structure subsystem obtained in the real-time AMD subsystem test agree well with the simulation results. Furthermore, all the test results show good repeatability. Therefore, the feasibility and reliability of the proposed real-time AMD subsystem testing approach for performance validation of AMD subsystem has been demonstrated. Such kind of experimental method is efficient in terms of reducing cost associated with performance validation of large-scale active control systems prior to the implementation. Copyright (c) 2013 John Wiley & Sons, Ltd.

Influence Analysis of a Higher-Order CSI Effect on AMD Systems and Its Time-Varying Delay Compensation Using a Guaranteed Cost Control Algorithm

Establishment of AMD control system considering CSI effect and its time-varying delay compensation

A Compensation Controller Based on a Regional Pole-Assignment Method for AMD Control Systems with a Time-Varying Delay

A Compensation Strategy Using an H<sub></sub> Control Law for a Multi-Time-Delay Control System

A State Feedback Controller Based on GCC Algorithm Against Wind-Induced Motion for High-Rise Buildings with Parametric Uncertainties

A Multi‐time‐delay Compensation Controller Using a Takagi–Sugeno Fuzzy Neural Network Method for High‐rise Buildings with an Active Mass Damper/driver System

A Reduced-Order Controller Considering High-Order Modal Information of High-Rise Buildings for AMD Control System with Time-Delay

A Variable Gain State‐feedback Technique for an AMD Control System with Stroke Limit and Its Application to a High‐rise Building

A Stroke-Limitation AMD Control System with Variable Gain and Limited Area for High-Rise Buildings

Control Force Characteristics of Structural AMD Systems

Real-Time Hybrid Simulation Approach for Performance Validation of Structural Active Control Systems: A Linear Motor Actuator Based Active Mass Driver Case Study

Deep reinforcement learning‐based active mass driver decoupled control framework considering control–structure interaction effects

Two-layer structure strategy for large-scale systems integrating online adaptive constraints adjustment method and cooperative distributed DMC algorithm

Guaranteed Cost Control and Its Application to Networked Control Systems

A single-degree-of-freedom system using a time-delayed control algorithm: Principle and experimental study

Robust strategy for active structural control system

CHARACTERISTIC INDICES AND ANALYSIS OF ACTIVE CONTROL FORCES IN ACTIVE MASS DRIVER CONTROL SYSTEM FOR STRUCTURAL VIBRATION

Research on the application of H∞ control in the AMD active structure control benchmark problem

Active Control of A Nonlinear and Hysteretic Building Structure with Time Delay

Study on Control Effects of Active Control Systems with Time Delays

Application of state feedback control based on regional pole-assignment method in flexible buildings