Abstract:Compared to the semi-active control and passive control systems, an active control system is able to achieve the most desirable vibration control performance because of its high adaptability and capacity to directly produce the required optimal control force (ROCF). However, the disadvantages of high energy consumption and low reliability limit its wide application. To address this dilemma, a novel ‘Quasi-active’ control concept and a representative quasi-active negative stiffness damper (QANSD) system integrating a negative stiffness element and an MR damper were proposed by the authors very recently. The QANSD system has been theoretically and numerically verified to be able to fully generate the ROCF and realize active control performance with much less external power consumption than a semi-active control system. To further validate the effectiveness of the innovative concept and the proposed QANSD system, in this study, a comprehensive experimental investigation was conducted based on the developed prototype device. The fundamentals of the QANSD system including realizations and mechanical behaviours are firstly introduced, and the experimental prototype and setup are then provided. Following that, experimental tests on the QANSD system and its MR damper and negative stiffness element components were carried out under different harmonic excitations and command currents. Based on the experimental test results, artificial neural network-based forward and inverse models are designed for the QANSD force and command current identifications. Moreover, the real-time vibration control performances of the QANSD system are investigated and compared with the active and semi-active control systems. The experimental results revealed that compared to the MR damper that was only able to generate force in the opposite direction of structural motion, the developed QANSD system had the capacity to provide both velocity-resisting and velocity-assisting forces as the ROCF does. Its vibration control performance could fully match that of the desired active control system, but with much lower energy consumption.

CHARACTERISTIC INDICES AND ANALYSIS OF ACTIVE CONTROL FORCES IN ACTIVE MASS DRIVER CONTROL SYSTEM FOR STRUCTURAL VIBRATION

Model-Free Adaptive Control of an Active Half-Vehicle-Seat System Coupled with a Nonlinear Energy Sink Inerter (NESI)

Characteristics of Active Forces in Structural Hybrid Mass Damper Control Systems

Control Force Characteristics of Structural AMD Systems

Active Vibration Control Analysis of Spatial Structures by State-Derivative Feedback Algorithm

Real-Time Hybrid Simulation Approach for Performance Validation of Structural Active Control Systems: A Linear Motor Actuator Based Active Mass Driver Case Study

Direct Drive Volume Control of Electric-Hydraulic Servo System and Its Application in Active Mass Driver (AMD) Systems

Analysis of Capability for Semi-Active or Passive Damping Systems to Achieve the Performance of Active Control Systems

Design Approaches for Active,semi-Active and Passive Control Systems Based on Analysis of Characteristics of Active Control Force

Modeling and Numerical Analysis on Direct Driving Active Mass Driver Control System for Structural Vibrations

Vibration Suppression for Motor-Driven Uncertain Active Suspensions with Hard Constraints and Analysis of Energy Consumption

Modeling and dynamical testing of an innovative electro-magnetic active mass driver control system for structural vibration

Experimental study of a novel quasi-active negative stiffness damper system for achieving optimal active control performance

ACTIVE STRUCTURAL CONTROL BASED ON LQG/LTR METHOD

Analysis of a Hybrid Passive-active Vehicle Suspension Based on the Actuator Force Feedback Control

Tracking Active Control Forces by Using a Semi-Active Vehicle Suspension Integrated with Negative Stiffness

Design and Development of an Active Suspension System Using Pneumatic-Muscle Actuator and Intelligent Control

A Variable Gain State‐feedback Technique for an AMD Control System with Stroke Limit and Its Application to a High‐rise Building

Research on Coordinated Control of Vehicle Inertial Suspension Using the Dynamic Surface Control Theory

Research on the application of H∞ control in the AMD active structure control benchmark problem

Deep reinforcement learning‐based active mass driver decoupled control framework considering control–structure interaction effects