Abstract:To address the geological hazard posed by unstable loess slopes prone to collapse and landslides, a high-strength geopolymer cementing material was developed utilizing green steel slag–fly ash as its primary constituent and activated through the application of sodium silicate alkalinity. The mechanical properties and microstructure changes of loess under varying dosages of steel slag–fly ash geopolymers and curing age were investigated through a series of tests, including unconfined compressive strength, direct shear, disintegration, electron microscope scanning, and X-ray diffraction. The findings indicate that the incorporation of geopolymers can significantly enhance the internal friction angle, cohesion, and unconfined compressive strength of loess, while mitigating the disintegration quantity and rate of stabilized soil. When 20% geopolymer is mixed into the solidified soil and cured for 28 days, the resulting solidified soil exhibits an internal friction angle of 31.12°, a cohesion of 81.09 kPa, and an unconfined compressive strength of 570.86 kPa. These values are 1.62 times, 1.76 times, and 3.36 times higher than those of loess, respectively. Moreover, the solidified soil shows minimal disintegration within 1800 s, with only 1.97% disintegration. The curing age of solidified soil has a significant impact on its curing effect. Enhancing the curing time can considerably enhance the mechanical properties of solidified soil. When the geopolymer content is 20% and the curing time is extended to 28 days, the internal friction angle, cohesion, and unconfined compressive strength increase by approximately 0.23 times, 0.48 times, and 1.61 times, respectively, compared to a curing time of 7 days. By analyzing SEM and XRD, it was found that the hydration of steel slag–fly ash geopolymer produces C-S-H and C-A-S-H cementing materials, which effectively fill the gaps between soil particles and enhance the mechanical properties of solidified soil. The research findings can serve as a theoretical foundation for the consolidation of loess subgrade utilizing steel slag–fly ash geopolymer.

Synthesis Reaction and Compressive Strength Behavior of Loess-Fly Ash Based Geopolymers for the Development of Sustainable Green Materials

Synthesis and Properties of Fly Ash Geopolymer with Dyeing Sludge

Fly Ash-Based Geopolymer Building Materials for Green and Sustainable Development

An efficient approach for sustainable fly ash geopolymer by coupled activation of wet-milling mechanical force and calcium hydroxide

Physico-chemical properties and durability of a fly-ash-based geopolymer

Designing low-carbon fly ash based geopolymer with red mud and blast furnace slag wastes: Performance, microstructure and mechanism

Analyzing Influence of Mix Design Constituents on Compressive Strength, Setting Times, and Workability of Geopolymer Mortar and Paste

Synthesis Factors Affecting Mechanical Properties, Microstructure, and Chemical Composition of Red Mud–fly Ash Based Geopolymers

Study on the Reinforced Properties of Geopolymer Fibers with a Sustainable Development Role

Mechanical Properties and Microscopic Study of Steel Slag–Fly Ash-Solidified Loess under Alkaline Conditions

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Solidification of (Pb–Zn) mine tailings by fly ash-based geopolymer I: influence of alkali reagents ratio and curing condition on compressive strength

Mechanical Properties of Geopolymers Synthesized from Fly Ash and Red Mud under Ambient Conditions

Low-carbon wet-ground fly ash geopolymer activated by single calcium carbide slag

Synthesis and Performance Evaluation of Nano-Calcium Carbonate-Modified Geopolymers Incorporating Fly Ash and Manganese Slag: A Comprehensive Investigative Study

Calcium carbide residue and Glauber's salt as composite activators for fly ash-based geopolymer

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Enhancing Strength and Quantifying Sustainability of Building Blocks Manufactured by Geopolymerization

Study of In Situ Foamed Fly Ash Geopolymer

Properties of geopolymer based on fly ash

Factors affecting the property of open-cell fly ash-based porous geopolymer via replica method