Abstract:Simultaneous removal of NOχ and diesel soot particulate in the presence of excess oxygen was investigated over ternary AB2O4 spinel oxides by using temperature programmed reaction (TPR) in which the soot/catalyst mixture was heated in the reaction gas containing nitric oxide and oxygen. The catalytic performance was evaluated by the ignition temperature of soot (Tig) as a measure of activity, selectivity to nitrogen formation (SN2C) defined as a fraction of the charged soot used for nitrogen formation and selectivity to nitrous oxide (SN2O = N2ON2 +N2O. The catalytic performance depended significantly on constituent metal cations and CuFe2O4 was the most excellent catalyst with the highest (SN2C lowest (SN2O and intermediate Tig. The comparison of catalytic performance of simple metal oxides, their mechanical mixtures and spinels in CuFe and CuCr systems revealed the appearance of synergetic effect in the SN2C enhancement by forming spinel structure. As for the activity and the selectivity to nitrous oxide, on the other hand, only the additive effect was observed. When a substantial amount of the charged soot remained in the soot/catalyst mixture and the effective area of the soot/catalyst contact was regarded as constant, Arrhenius plots of rates of carbon dioxide, nitrogen and nitrous oxide formation gave straight lines, suggesting that kinetic analysis of non-steady TPR results was possible. The compensation effect and good relation between SN2C and the apparent activation energy for nitrogen formation were found in the simultaneous NOχ-soot removal over spinel catalysts.

Simultaneous removal of soot and NOx with Ru-Ir/TiO2 catalyst under oxygen-rich condition

Simultaneous Removal of Soot and NOx over Ir-based Catalysts in the Presence of Oxygen

Simultaneous Removal of Soot and NOx with Ruthenium-based Bi-noble Metal Catalysts

Simultaneous removal of soot and NOx with noble metal catalysts

An Exploratory Study on Simultaneous Removal of Soot and NO over Ir/γ-Al2O3 Catalyst in the Presence of O2

Simultaneous removal of soot and NOx over precious metal catalysts O2-rich atmospheres and in the presence of H2O and SO2

Catalytic removal of soot over Ru-based bimetallic noble catalysts in fluidized bed reactor under oxygen-rich condition

An Exploratory Study on Simultaneous Removal of Nitrogen Oxides and Soot from Diesel Exhaust Gas: Single Component Metal Oxide Catalysts

A single site ruthenium catalyst for robust soot oxidation without platinum or palladium

Soot Oxidation with Ir-based Catalysts in the Presence of O2 and NO

Oxidation of Soot over Bimetallic Noble Catalysts in the Presence of O-2 in Fluidized Bed Reactor

Simultaneous Catalytic Removal of NOχ and Diesel Soot Particulates over Ternary AB2O4 Spinel-Type Oxides

Performance of soot oxidation by O 2 /NO/N 2 atmosphere in various catalyst species

Simultaneous Catalytic Removal of NOx and Soot Particulates over CuMgAl Hydrotalcites Derived Mixed Metal Oxides

Ti species regulated CuO/CeO2 catalyst for efficient simultaneously NH3-SCR denitration and CO oxidation under oxygen-rich conditions

Simultaneous Catalytic Removal of Soot and NO_x over Nd_2O_3-based Complex Catalysts

Simultaneous Catalytic Removal of Nox and Diesel Soot over Cu-Containing Hydrotalcite Derived Catalysts

Active Oxygen-Assisted NO-NO2 Recycling and Decomposition of Surface Oxygenated Species on Diesel Soot with Pt/Ce0.6Zr0.4O2 Catalyst

A Highly Efficient and Porous Catalyst for Simultaneous Removal of NOx and Diesel Soot

Role and Reduction of NOx in the Catalytic Combustion of Soot over Iron–ceria Mixed Oxide Catalyst

The Catalyst of Ruthenium Nanoparticles Decorated Silicalite-1 Zeolite for Boosting Catalytic Soot Oxidation