Abstract:Soot particles in engine exhaust seriously pollute the atmosphere and endanger human health. For soot oxidation, Pt and Pd precious metal catalysts are widely used and are effective. In this paper, the catalytic characteristics of catalysts with different Pt/Pd mass ratios for soot combustion were studied through X-ray diffraction, X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller analysis, scanning electron microscopy, transmission electron microscopy, the temperature-programmed oxidation reaction, and thermogravimetry. Besides, the adsorption characteristics of soot and O2 on the catalyst surface were explored by density functional theory (DFT) calculations. The research results showed that the activity of catalysts for soot oxidation from strong to weak is Pt/Pd = 10:1, Pt/Pd = 5:1, Pt/Pd = 1:0, and Pt/Pd = 1:1. XPS results showed that the concentration of oxygen vacancies in the catalyst is the highest when the Pt/Pd ratio is 10:1. The specific surface area of the catalyst increases first and then decreases with the increase of Pd content. When the Pt/Pd ratio is 10:1, the specific surface area and pore volume of the catalyst reach the maximum. The following are the DFT calculation results. With the increase of Pd content, the adsorption energy of particles on the catalyst surface decreases first and then increases. When the Pt/Pd ratio is 10:1, the adsorption of C on the catalyst surface is the strongest, and the adsorption of O2 is also strong. In addition, this surface has a strong ability to donate electrons. The theoretical simulation results are consistent with the activity test results. The research results have a guiding significance for optimizing the Pt/Pd ratio and improving the soot oxidation performance of the catalyst.

Oxidation of Soot over Bimetallic Noble Catalysts in the Presence of O-2 in Fluidized Bed Reactor

Catalytic removal of soot over Ru-based bimetallic noble catalysts in fluidized bed reactor under oxygen-rich condition

The Catalyst of Ruthenium Nanoparticles Decorated Silicalite-1 Zeolite for Boosting Catalytic Soot Oxidation

Simultaneous Removal of Soot and NOx with Ruthenium-based Bi-noble Metal Catalysts

Simultaneous removal of soot and NOx with Ru-Ir/TiO2 catalyst under oxygen-rich condition

Study on the Catalytic Characteristics of Precious Metal Catalysts with Different Pt/Pd Ratios for Soot Combustion

Simultaneous removal of soot and NOx with noble metal catalysts

Size effect of Pt nanoparticles in acid-assisted soot oxidation in the presence of NO

Performance of soot oxidation by O 2 /NO/N 2 atmosphere in various catalyst species

Simultaneous Removal of Soot and NOx over Ir-based Catalysts in the Presence of Oxygen

Soot Oxidation with Ir-based Catalysts in the Presence of O2 and NO

Simultaneous Catalytic Removal of NOχ and Diesel Soot Particulates over Ternary AB2O4 Spinel-Type Oxides

Activity and Stability of Co3O4-based Catalysts for Soot Oxidation: the Enhanced Effect of Bi2O3 on Activation and Transfer of Oxygen

The Catalytic Removal of Diesel Soot and NOx on Molybdenum Trioxide-Based Composites

Simultaneous removal of soot and NOx over precious metal catalysts O2-rich atmospheres and in the presence of H2O and SO2

Roles of Acid Sites on Pt/H-Zsm5 Catalyst in Catalytic Oxidation of Diesel Soot

A single site ruthenium catalyst for robust soot oxidation without platinum or palladium

Catalytic Combustion Of Soot Over The Highly Active (La0.9k0.1coo3)(X)/Nmceo(2) Catalysts

An Exploratory Study on Simultaneous Removal of Soot and NO over Ir/γ-Al2O3 Catalyst in the Presence of O2

Kinetics of Soot—o2, Soot—no and Soot—o2—no Reactions over Spinel-Type CuFe2O4 Catalyst

Sulfation of Pt/Al2O3 Catalyst for Soot Oxidation: High Utilization of NO2 and Oxidation of Surface Oxygenated Complexes