Optimal Design of Megahertz Wireless Power Transfer Systems for Biomedical Implants.

Siyu Peng,Ming Liu,Zefan Tang,Chengbin Ma

DOI: https://doi.org/10.1109/isie.2017.8001349

2017-01-01

Abstract:Wireless power transfer (WPT) working at megahertz (MHz) is widely considered a promising technology for the mid-range transfer of low power. In the biomedical implantable WPT systems, the receiving coil is small. Meanwhile, in real applications, the required transfer distance is large. Thus, the coupling coefficient k is low. For the applications of large load, the low coupling coefficient k and large load R l deteriorate the system efficiency largely. This paper proposes a optimal design method of MHz WPT systems for biomedical implants. A capacitive L-matching network is inserted in the conventional MHz Class WPT system to enlarge the reflected impedance of the receiving coil on the transmitting side, i.e., improve the power transfer capability and efficiency of the coupling coils. Then the input impedance of the matching network and efficiency of the proposed MHz WPT system are derived and serves as the basis of the proposed parameter design procedure. Based on the circuit improvement and analytical derivations, a numerical optimization design method is proposed to optimize the design parameters of the MHz WPT system. The final experiment verifies the feasibility of the design procedure. With loosely coupled coils (coupling coefficient k=0.035, distance of the coupling coils=1.5 cm, diameter of receiving coil=1.5 cm), the system efficiency can achieve 36.43% under a 0.5 W power transfer.