Abstract:Al–Nb–B refiner has been considered as an alternative to Al–Ti–B refiner for hypoeutectic Al–Si alloys due to Si-poisoning effect. In this paper, the effects of Al–Nb–B and Al–Ti–B refiner on the microstructure and mechanical properties in indirect squeeze casting Al–8Si-0.2Mg-0.5Mn alloy were compared. Results show that the grain sizes in the edge chilling layer, segregation band, and the center region of the Al–Nb–B refined alloys were refined by 13.9%, 12.5%, and 17.6% compared to Al–Ti–B refined alloys, respectively. The yield strength, tensile strength, and elongation of Al–Nb–B inoculated alloys were superior to those of the unrefined alloys and Al–Ti–B inoculated alloys. The coexistence of NbAl 3 and NbB 2 particles in the Al–Nb–B refiner exhibited excellent anti Si-poisoning capability. They significantly decreased the grain size and uniformly distributed the eutectic Si particles and Fe-rich phases, resulting in an increase in the yield strength of the alloy by 16.1% compared to the Al–Ti–B inoculated alloy. The distribution of iron-rich phases in the segregation band was affected by the inoculation. The size of α-Al 15 (Fe, Mn) 3 Si 2 phase in Al–Ti–B inoculated alloys was refined, and the number significantly increased, resulting in a decrease in tensile strength of 12.82 MPa. In the Al–Nb–B inoculated alloys, the size and number of α-Al 15 (Fe, Mn) 3 Si 2 phase decreased, and the δ-Al 4 FeSi 2 phase increased, which effectively improved the fracture toughness and ductility. In addition, with the increase in grain refinement (from unrefined to Al–Ti–B to Al–Nb–B inoculated alloy), the fracture behavior changed from trans -granular fracture to intergranular fracture, improving the fracture toughness.

Refining effect of an intermetallic inoculant on a Cu–Al–Mn shape memory alloy

Synergistic effects of a novel Cu51Hf14 inoculant and Zr element on the microstructure and properties of Cu-Al-Mn shape memory alloy

Effects of grain refinement on the microstructures and damping behaviors of a Cu–Al–Ni–Mn–Ti shape memory alloy

Effect of combined use of inoculation and hot rolling on microstructures and damping property of a Cu-Al-Ni-Mn-Ti shape memory alloy

Effect of caliber rolling on microstructures and properties of an inoculated Cu–Al–Ni shape memory alloy

Preparation of Al3Ti-Al2O3/Al Inoculant and Its Inoculation Effect on Al-Cu-Mn Alloy

Enhancing the mechanical properties of Mg-Zn-Al-Cu-Mn alloy via MgCO3 inoculation treatment: Experimental studies and first-principles calculations

Effect of Co Addition on Solidification Velocity, Hardness and Refined Structure Transformation Mechanisms of Undercooled Ni-Cu-Co Alloys

Effect of alloying elements (Nb, Ag) on the damping performance of Cu–Al–Mn shape memory alloys

Microstructure and mechanical properties of non-heat-treated Al-8Si-0.2Mg-0.5Mn alloy inoculated by Al-Nb-B refiner

Effect of ultrasonic melt processing and Al-Ti-B on the microstructural refinement of recycled Al alloys

Grain Refinement of Superalloy In718c by the Addition of Inoculants

Microstructures and properties of AlZnMgCu alloys refined by nano Al3Ti‐TiB2‐AlN‐TiN/Al inoculant ribbons

Tailoring microstructure and mechanical properties of Al-Mg-Si-Cu alloy with varying Mn and/or Cr additions

An experimental study of the effect of Ag, Cu, Li, Mg, Ni, Ti, Sc, Zr on grain refining in binary and multicomponent Al-based alloys

Enhancing the Thermal Stability and Recoverability of ZrCu-based Shape Memory Alloys Via Interstitial Doping

On Grain Coarsening and Refining of the Mg–3Al Alloy by Sm

Effect of Al-Nb-Ti-B addition on microstructures, tensile mechanical and damping properties of AZ91 alloy

Effects of Al-Ti-C Refiner and Forming Processes on the Microstructure and Properties of Al-Zn-Mg-Cu Alloys

Tailoring intermetallic phase and mechanical property improvement in a novel Al-Zn-Mg-Cu-Y alloy via homogenization treatment

Optimizing Recrystallization Behavior Induced by Mn Micro-Alloying for Reduced Anisotropy in Rolled Al–Cu–Li Alloys