Abstract:This paper presents a new pose measurement method of microminiature parts that is capable of transforming one dimension (1D) contour size obtained by optical micrometer to three dimension (3D) data with six parameters for microassembly. Pose measurement is one of the most important processes for microminiature parts' alignment and insertion in microassembly. During the past few years, researchers have developed their microassembly systems focusing on visual identification to obtain two or three dimension data with no more than three parameters. Scanning electronic microscope (SEM), optical microscope, and stereomicroscope are applied in their systems. However, as structures of microminiature parts become increasingly complex, six parameters to represent their position and orientation are specifically needed. Firstly, The pose measurement model is established based on the introduction of measuring objects and measuring principle of optical micrometer. The measuring objects are microminiature parts with complex 3D structure. Two groups of two dimension (2D) data are gathered at two different measurement positions. Then part pose with 6 parameters is calculated, including 3 position parameters of feature point of the part and 3 orientation parameters of the part axis. Secondly, pose measurement process for a small shaft, vertical orientation determination, and position parameters obtaining are presented. 2D data is gathered by scanning the generatrix of the part, and valid data is extracted and saved in arrays. A vertical orientation criterion is proposed to determine whether the part is parallel to the Z-axis of the coordinate. If not, 2D data will be fixed into a linear equation using least square algorithm. Then orientation parameters are calculated. Center of Part End (CPE) is selected as feature point of the part, and its position parameters are extracted form two group of 2D data. Finally, a fast pose measurement device is developed and representative experiments are carried out. Results show that the measurement method could obtain pose of complex 3D micro parts fast and accurately, and can meet the demand of microassembly system.

Measurement of Centroid Position for Parts with Complex Shape Based on Three-Dimensional Modeling Techniques

Accuracy Analysis of Centroid Detection Method Used to Star Sensor

Assembly Accuracy Analysis for Small Components with A Planar Surface in Large-Scale Metrology

3D Measuring Points Registration Based on Datum-Points in Reverse Engineering

Realistic Geometry Based Feature Modeling of Complex Part and Its Application in Assembly Quality Analysis

A Combined Measurement Method for Large-Size Aerospace Components

Study on development of vehicle mass and centroid measurement system

Model-based Machine Center Computer Aided On-machine Measurement Strategy

Method for measuring the center of mass and moment of inertia of a model using 3D point clouds

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Measuring Method and Error Analysis on Moment of Inertia of Complex Shaped Components

Flexible Measurement of Large Scale Column Structure's Centroid Based on Coordinate Measurement Equipment

Centroid Measurement Method and Experimental Study of Multi-configuration Planetary Rover

Research on the Pose Error Compensation Technology for the Mass and Centroid Measurement of Large-Sized Aircraft Based on Kinematics

3D Measurement System of Micro-Organization Based on Two-Ray-path Scanning

Pose Measurement Method with Six Parameters for Microassembly Based on an Optical Micrometer

2D Part Size Measurement based on Multi-CCD

Accuracy Characterization and Measurement Point Planning for Workpiece Localization

Size Measurement of Thin-walled Parts Based on Point Cloud Classification Simplification Strategy

Measurement Using Laser Interferometer and Software Compensation of Volumetric Errors of Three-axis CNC Machining Centeres

3D Measurement of Large and Complex Parts Based on Phase Matching and Global Marker Points Registration