Abstract:Achieving efficient charge transfer at small frontier molecular orbital offsets between donor and acceptor is crucial for high performance polymer solar cells (PSCs). Here we synthesize a new wide band gap polymer donor, PTQ11, and a new low band gap acceptor, TPT10, and report a high power conversion efficiency (PCE) PSC (PCE = 16.32%) based on PTQ11-TPT10 with zero HOMO (the highest occupied molecular orbital) offset (ΔEHOMO(D-A)). TPT10 is a derivative of Y6 with monobromine instead of bifluorine substitution, and possesses upshifted lowest unoccupied molecular orbital energy level (ELUMO) of -3.99 eV and EHOMO of -5.52 eV than Y6. PTQ11 is a derivative of low cost polymer donor PTQ10 with methyl substituent on its quinoxaline unit and shows upshifted EHOMO of -5.52 eV, stronger molecular crystallization, and better hole transport capability in comparison with PTQ10. The PSC based on PTQ11-TPT10 shows highly efficient exciton dissociation and hole transfer, so that it demonstrates a high PCE of 16.32% with a higher Voc of 0.88 V, a large Jsc of 24.79 mA cm-2, and a high FF of 74.8%, despite the zero ΔEHOMO(D-A) value between donor PTQ11 and acceptor TPT10. The PCE of 16.32% is one of the highest efficiencies in the PSCs. The results prove the feasibility of efficient hole transfer and high efficiency for the PSCs with zero ΔEHOMO(D-A), which is highly valuable for understanding the charge transfer process and achieving high PCE of PSCs.

High-performance Nonfullerene Polymer Solar Cells with Open-Circuit Voltage over 1 V and Energy Loss As Low As 0.54 Ev

Nonfullerene Polymer Solar Cells based on a Perylene Monoimide Acceptor with a High Open‐Circuit Voltage of 1.3 V

High Efficiency Nonfullerene Polymer Solar Cells with Thick Active Layer and Large Area

8.0% Efficient All-Polymer Solar Cells with High Photovoltage of 1.1 V and Internal Quantum Efficiency near Unity

11.2% Efficiency All-Polymer Solar Cells with High Open-Circuit Voltage

All‐Polymer Solar Cells with over 12% Efficiency and a Small Voltage Loss Enabled by a Polymer Acceptor Based on an Extended Fused Ring Core

A Dithienobenzothiadiazole-Quaterthiophene Wide Bandgap Polymer Enables Non-Fullerene Based Polymer Solar Cells with over 15% Efficiency

All-polymer solar cells based on a novel narrow-bandgap polymer acceptor with power conversion efficiency over 10%

Mapping Nonfullerene Acceptors with a Novel Wide Bandgap Polymer for High Performance Polymer Solar Cells

Angular-Shaped Dithienonaphthalene-Based Nonfullerene Acceptor for High-Performance Polymer Solar Cells with Large Open-Circuit Voltages and Minimal Energy Losses

Indenothiophene‐Based Wide Bandgap Copolymer for Polymer Fullerene Solar Cells with 9.01% Efficiency and 1.0 V Open Circuit Voltage

High-performance nonfullerene polymer solar cells based on chlorinated quinoxaline copolymer with a high short-circuit current density

Over 14% efficiency all-polymer solar cells enabled by a low bandgap polymer acceptor with low energy loss and efficient charge separation

Organic Photovoltaics: Low Band Gap Polymer Solar Cells with Minimal Voltage Losses (adv. Energy Mater. 18/2016)

A Novel Wide Bandgap Conjugated Polymer (2.0 Ev) Based on Bithiazole for High Efficiency Polymer Solar Cells

High-Performance Fullerene-Free Polymer Solar Cells Featuring Efficient Photocurrent Generation from Dual Pathways and Low Nonradiative Recombination Loss

A(1)-A(2) Type Wide Bandgap Polymers for High-Performance Polymer Solar Cells: Energy Loss and Morphology

14.4% efficiency all-polymer solar cell with broad absorption and low energy loss enabled by a novel polymer acceptor

Semitransparent Ternary Nonfullerene Polymer Solar Cells Exhibiting 9.40% Efficiency and 24.6% Average Visible Transmittance

High Efficiency Polymer Solar Cells with Efficient Hole Transfer at Zero Highest Occupied Molecular Orbital Offset Between Methylated Polymer Donor and Brominated Acceptor.

Efficient Polymer Solar Cells with Open-Circuit Voltage of 1.01 V and Power Conversion Efficiency of 8.09%