Abstract:Chlorinated PTB7‐Th boostsperylene diimides (PDI)‐based organic solar cells (OSCs), exceeding 10% efficiency. This is the highest power conversion efficiency (PCE) value with one of the lowest energy losses for OSCs based on PTB7‐Th derivatives:PDI‐type nonfullerene acceptors. The chlorinated side thienyl groups can elevate the charge‐transfer state, reduce the degree of energetic disorder, and increase the electroluminescent quantum efficiency by two orders of magnitude, thus resulting in 0.103 eV lower nonradiative energy loss. The scarcity of narrow bandgap donor polymers matched with perylene diimides (PDI)‐based nonfullerene acceptors (NFAs) hinders improvement of the power conversion efficiency (PCE) value of organic solar cells (OSCs). Here, it is reported that a narrow bandgap donor polymer PDX, the chlorinated derivative of the famous polymer donor PTB7‐Th, blended with PDI‐based NFA boosts the PCE value exceeding 10%. The electroluminescent quantum efficiency of PDX‐based OSCs is two orders of magnitude higher than that of PTB7‐Th‐based OSCs;therefore, the nonradiative energy loss is 0.103 eV lower. This is the highest PCE value for OSCs with the lowest energy loss using the blend of PTB7‐Th derivatives and PDI‐based NFAs as the active layer. Besides, PDX‐based devices showed larger phase separation, faster charge mobilities, higher exciton dissociation probability, suppressed charge recombination, elevated charge transfer state, and decreased energetic disorder compared with the PTB7‐Th‐based OSCs. All these factors contribute to the simultaneously improved short circuit current density, open circuit voltage, and fill factor, thus significantly improving PCE. These results prove that chlorinated conjugated side thienyl groups can efficiently suppress the non‐radiative energy loss and highlight the importance of fine‐modifying or developing novel narrow bandgap polymers to further elevate the PCE value of PDI‐based OSCs.

High-performance nonfullerene polymer solar cells based on chlorinated quinoxaline copolymer with a high short-circuit current density

Mapping Nonfullerene Acceptors with a Novel Wide Bandgap Polymer for High Performance Polymer Solar Cells

A Wide-Bandgap Conjugated Polymer Based on Quinoxalino[6,5-f ]quinoxaline for Fullerene and Non-Fullerene Polymer Solar Cells

Rationally pairing photoactive materials for high-performance polymer solar cells with efficiency of 16.53%

High-Performance Fullerene-Free Polymer Solar Cells Featuring Efficient Photocurrent Generation from Dual Pathways and Low Nonradiative Recombination Loss

High Efficiency Polymer Solar Cells with Efficient Hole Transfer at Zero Highest Occupied Molecular Orbital Offset Between Methylated Polymer Donor and Brominated Acceptor.

Chloride side-chain engineered quinoxaline-based D-A copolymer enabling non-fullerene organic solar cells with over 16% efficiency

18.6% Efficiency All‐Polymer Solar Cells Enabled by a Wide Bandgap Polymer Donor Based on Benzo[1,2‐d:4,5‐d′]bisthiazole

Difluorobenzoxadiazole-based Conjugated Polymers for Efficient Non-Fullerene Polymer Solar Cells with Low Voltage Loss

n-Octyl substituted quinoxaline-based polymer donor enabling all-polymer solar cell with efficiency over 17%

Chlorinated Narrow Bandgap Polymer Suppresses Non‐Radiative Recombination Energy Loss Enabling Perylene Diimides‐Based Organic Solar Cells Exceeding 10% Efficiency

Chlorination of Conjugated Side Chains to Enhance Intermolecular Interactions for Elevated Solar Conversion

Synthesizing near‐ultraviolet absorbed donor for transparent polymer solar cells

Dithienoquinoxalineimide‐based Polymer Donor Enables All‐Polymer Solar Cells Over 19% Efficiency

Near‐Infrared Electron Acceptors with Fluorinated Regioisomeric Backbone for Highly Efficient Polymer Solar Cells

High-performance fullerene-free polymer solar cells with 6.31% efficiency

Developing Halogen‐Free Polymer Donors for Efficient Nonfullerene Organic Solar Cells by Addition of Highly Electron‐Deficient Diketopyrrolopyrrole Unit

Over 14% efficiency all-polymer solar cells enabled by a low bandgap polymer acceptor with low energy loss and efficient charge separation

All-Polymer Solar Cells Based on A Blend of Poly[3-(10-N-Octyl-3-Phenothiazine-Vinylene)Thiophene-Co-2,5-Thiophene] and Poly[1,4-Dioctyloxyl-P-2,5-Dicyanophenylenevinylene]

Wide-bandgap Donor Polymers Based on a Dicyanodivinyl Indacenodithiophene Unit for Non-Fullerene Polymer Solar Cells

NIR-absorbing Polymer Acceptor for Efficient All-Polymer Solar Cells with a Record-High Photocurrent of 26.5 ma Cm−2