Abstract:In a DC plasma spray torch, the plasma-forming gas is the most intensively heated and accelerated at the cathode arc attachment due to the very high electric current density at this location. A proper prediction of the cathode arc attachment is, therefore, essential for understanding the plasma jet formation and cathode operation. However, numerical studies of the cathode arc attachment mostly deal with transferred arcs or conventional plasma torches with tapered cathodes. In this study, a 3D time-dependent two-temperature model of electric arc combined with a cathode sheath model is applied to the commercial cascaded-anode plasma torch SinplexPro fitted with a wide single cathode. The model is used to investigate the effect of the cathode sheath model and bidirectional cathode-plasma coupling on the predicted cathode arc attachment and plasma flow. The model of the plasma-cathode interface takes into account the non-equilibrium space-charge sheath to establish the thermal and electric current balance at the interface. The radial profiles of cathode sheath parameters (voltage drop, electron temperature at the interface, Schottky reduction in the work function) were computed on the surface of the cathode tip and used at the cathode-plasma interface in the model of plasma torch operation. The latter is developed in the open-source CFD software Code_Saturne. It makes it possible to calculate the plasma flow fields inside and outside the plasma torch as well as the enthalpy and electromagnetic fields in the gas phase and electrodes. This study shows that the inclusion of the cathode sheath model in the two-temperature MHD model results in a higher constriction of the cathode arc attachment, more plausible cathode surface temperature distribution, more reliable prediction of the torch voltage and cooling loss, and more consistent thermal balance in the torch.

Influence of Mixed Cathode Emissivity on Generated Plasma Flow in Vacuum Arc with Heated Cathode

A Distributed Carbon Cathodic Vacuum Arc

Formation of emission plasma in a pulsed forevacuum-pressure plasma-cathode electron source based on a cathodic arc with redistributing electrode

A Novel Method to Generate Multicomponent Metal Ions by Anodic and Cathodic Vacuum Arc Plasmas with Pure Electrodes

Numerical study on the effects of discharge parameters on vacuum arc plasma

Plasma enhancement of current from carbon cathodes for field emission displays

Generation of multiply charged metal ions in a high current short pulse vacuum arc

Pulsed vacuum arc plasma source of supersonic metal ion flow

Effect of Cathode-Plasma Coupling on Plasma Torch Operation Predicted by a 3D Two-Temperature Electric Arc Model

Modeling Of Vacuum Arc Plasmas In Anode Spot Or Anode Plume Mode Taking Into Account Multiple Ion Components

Effect of Burning Conditions on Erosion Shape of Cathode in Pulsed Cathodic Arcs

Effect Of A Near-Cathode Sheath On Heat Transfer In High-Pressure Arc Plasmas

Effects of selected cathode materials on a magnetically enhanced vacuum arc thruster

Cathode Plasma Expansion at Early Vacuum Arc at Pulsed Plasma Emission

Experimental Study on Dynamic Characteristics of Charged Particles in Vacuum Arc

Experimental Study on Spatial and Temporal Distribution of Metal Vapor Atoms in High-Current Vacuum Arc

Discharge and Plasma Characteristics of Pulse-Enhanced Vacuum Arc Evaporation (PEVAE) for Titanium Cathode

Study on the influence of metal particles on the characteristics of high-current vacuum arc plasma

Investigation on Anode Plume in High-Current Vacuum Arc by Experiments and Simulations

Simulating vacuum arc initiation by coupling emission, heating and plasma processes