Abstract:Abrupt formation of plasma in a high-voltage insulating vacuum gap and subsequent discharge of electrodes limits the reliability of a class of vacuum electronic devices, such as X-ray tubes. It has been suggested that electron field emission from negatively charged electrodes would precede and initiate such discharge. Heating and evaporation of material upon field emission would cause dense plasma to develop in periods of nanoseconds. High-pressure plasma would expand from the cathode, eventually bridging the gap. Nevertheless, the very reason for the unredictable initial development of discharge events after long periods of reliable operation is still matter of debate. Experience from industrial processes suggests hydrocarbon contamination to degrade the electric stability of high-voltage gaps. While former attempts aimed at explaining high field emission by carbonaceous 2D structures or surface resonance effects, this paper discusses whether 3D structures may grow slowly, until their evaporation in a matter of nanoseconds. Similar to the production of carbon nanotubes, protruding structures might comprise carbon and, in addition, metallic nanoparticles, which would boost production of vapor during their explosion. The hypothesis was tested by scanning electron and energy-dispersive X-ray inspection of two cathodes of medical X-ray tubes, covered with metallic seed nanoparticles, which served as model systems. A third cleaner cathode was inspected for comparison. Although certain suggested conditions of carbon feed, elevated substrate temperature and nanoparticle contamination of the surfaces were met, images showed only a very weak sign of growth of suspicious carbon structures. It seems, therefore, unlikely that CNT-like structures are a major cause of high-voltage breakdown between electrodes of X-ray tubes.

Generation of multiply charged metal ions in a high current short pulse vacuum arc

A Novel Method to Generate Multicomponent Metal Ions by Anodic and Cathodic Vacuum Arc Plasmas with Pure Electrodes

Pulsed vacuum arc plasma source of supersonic metal ion flow

Ion charge state distributions of pulsed vacuum arc plasmas in strong magnetic fields

Influence of Mixed Cathode Emissivity on Generated Plasma Flow in Vacuum Arc with Heated Cathode

A Distributed Carbon Cathodic Vacuum Arc

Experimental research of different plasma cathodes for generation of high-current electron beams

Effects of selected cathode materials on a magnetically enhanced vacuum arc thruster

Low-Current Discharge in a Flow of Atmospheric-Pressure Argon Under the Formation of Metal Atoms: Electric and Optical Characteristics

Experimental Study on Spatial and Temporal Distribution of Metal Vapor Atoms in High-Current Vacuum Arc

Experimental study on the DC discharge characteristics of wire-to-cylinder electrode configuration at high temperature

Vacuum arc spectroscopy diagnosis and particle distribution study in the near-cathode/near anode region

Spatial Imaging of the Electron Density Depending on Cathode Material in Vacuum Arc Discharge Observed with a Mach-Zehnder Interferometer

Anode Spot Threshold Current of Four Pure Metals Subjected to Uniform Axial Magnetic Field in High Current Vacuum Arcs

Discharge System with a Self-Heated Hollow Cathode and an Evaporating Anode in a Cusp Magnetic Field for Oxide Coatings Deposition

Experimental Study of a Compact Surface Flashover Ion Source

Adding high time resolution to charge-state-specific ion energy measurements for pulsed copper vacuum arc plasmas

Study on the influence of metal particles on the characteristics of high-current vacuum arc plasma

Experimental Study on Effects of Electrode Materials and Diameter on the High-current Vacuum Arc Voltage and Anode Activities

Experimental Investigation of Anode Activities in High-Current Vacuum Arcs

Electric Field Enhancing Artifacts as Precursors for Vacuum High-Voltage Breakdown