Abstract:Studying the characteristics of vacuum arc plasma within a wide range discharge parameters is vital for vacuum arc applications. In this study, specific parameters of vacuum discharge, including cathode temperature ranging from 6000 to 8000 K, emitted electron temperature spanning from 0.69 to 2.5 eV, and arc burning voltage within the range of 16-30 V, have been selected to analyze the effects of these parameters on the cathode erosion, cathode potential drop, and ion velocity. A validated one-dimensional spherical PIC-DSMC cathode spot model is employed to simulate the generation and expansion of vacuum arc plasma. The results indicate that increasing the cathode temperature and the emitted electron temperature both enhance the cathode eroded mass. However, this mass diminishes as the arc voltage increases due to more Cu ions and Cu atoms return to cathode under the high cathode potential drop and charge exchange collision, respectively. The cathode current density remains nearly constant within the explored range of cathode temperature, but increases as shifting the emitted electron temperature and arc voltage. A higher cathode current density, coupled with the positive cathode plasma resistance, induces a higher cathode potential drop that significantly surpasses the cathode sheath voltage. Furthermore, a higher ion velocity is observed at increased arc voltage due to the higher cathode current density generate stronger electron friction for accelerating ion. These findings could be valuable in designing a suitable arc voltage in vacuum electric thrusters to enhance thrust.

Cathode Plasma Expansion at Early Vacuum Arc at Pulsed Plasma Emission

A Distributed Carbon Cathodic Vacuum Arc

Experimental study of a microsecond-pulsed cold plasma jet

Kinetic Model of Vacuum Plasma Expansion in a Cylindrical Gap

Characterization of plasma expansion dynamics in a high power diode with a carbon-fiber-aluminum cathode

Kinetic Theory of Expansion of Two-Component Plasma in a Plane Vacuum Diode

Simulating vacuum arc initiation by coupling emission, heating and plasma processes

Formation of emission plasma in a pulsed forevacuum-pressure plasma-cathode electron source based on a cathodic arc with redistributing electrode

The kinetic theory of cathode plasma expansion in a spatially non-uniform geometric configuration of a vacuum diode

Plasma motion in a filtered cathodic vacuum arc

Numerical study on the effects of discharge parameters on vacuum arc plasma

On the expansion of non-ideal copper plasma into vacuum

Transient modelling and simulation of the forced arc extinguish period of the circuit breakers

Two-dimensional kinetic simulation of plasma dynamics in the post-arc stage of vacuum circuit breakers

Influence of Mixed Cathode Emissivity on Generated Plasma Flow in Vacuum Arc with Heated Cathode

Adding high time resolution to charge-state-specific ion energy measurements for pulsed copper vacuum arc plasmas

Critical state model for explosive emission plasma parameters estimation

Kinetic theory of high-voltage low-pressure gas discharge with electron initiation on a cathode in a planar gap

Formation of Anode Plasma in an Electron Diode with an Explosive-Emission Cathode

Modeling on plasma energy balance and transfer in a hollow cathode