Abstract:Rock pore structure, including porosity, pore size, and particle size, plays a crucial role in determining rock mechanical properties . This study investigates the impact of pore structure on rock mechanical properties through laboratory experiments and numerical simulation methods on sandstones with varying porosity and pore size. The pore structure characteristics of sandstone were determined using XRD, SEM, and NMR microscopic techniques. Additionally, the influence of rock porosity on rock mechanical properties was analyzed by combining Uniaxial compression test with DIC technology, revealing the fracture mechanism caused by porosity in rocks. Numerical models were constructed to simulate sandstones with different porosities and pore diameters, followed by uniaxial compression simulation tests to explore the influence of varying pore diameters on rock mechanical properties and the fracture mechanism. The study reveals the presence of four distinct pore types in the sandstone: micropores in the matrix (0–0.002 μm), intergranular pores (0.002–0.2 μm), dissolution pores (0.2–4 μm), and fracture pores (4–30 μm). Among these, intergranular pores and dissolution pores are the predominant types, accounting for approximately 92–96% of the total pore volume in the sandstone. It is observed that an increase in porosity leads to a decrease in the mechanical strength of sandstone and an increase in Poisson's ratio while keeping the pore size constant. Similarly, when the porosity remains constant, an increase in pore size results in a decrease in the mechanical strength and an increase in Poisson's ratio. Additionally, the study also finds that as the porosity and pore diameter of sandstone increase, the area of internal equivalent stress expands, leading to a shorter crack initiation time and accelerated crack penetration speed, ultimately resulting in a decline in the mechanical properties of sandstone. Numerical simulation experiments further demonstrate that large pores exhibit higher stress concentration compared to small pores, thereby exerting a more significant influence on the mechanical properties of sandstone.

Microstructure characteristics and its effects on mechanical properties of digital core

Fractal Features Study of Rock-Like Material Damage Based on Gray Correlation of Digital Images

3D Digital Analysis of Cracking Behaviors of Rocks through 3D Reconstruction Model under Triaxial Compression

Experimental Study of Multi-Angle Effects of Micron-Silica Fume on Micro-Pore Structure and Macroscopic Mechanical Properties of Rock-like Material Based on NMR and SEM

Discrete Element Analysis Of The Effect Of Meso-Structure Heterogeneity On The Mechanical Behavior Of Rock

Correlation Analysis between Microscopic Pore Parameters and Macroscopic Mechanical Properties of Rock-like Materials from the Perspective of Water-Cement Ratio and Sand-Cement Ratio

Study on Macroscopic Mechanical Behavior and Meso-failure Evolution of Gabbro of Different Particle Sizes

Investigation of Multiscale Failure Mechanism of Red Bed Soft Rock Using Grain-Based Finite-Discrete Element Method Combined with X-Ray Micro-computerized Tomography

Research and analysis of the impact of the pore structure on the mechanical properties and fracture mechanism of sandstone

Mechanical behaviour of weakly filled granite and a unified evaluation method for macro-fine-micro multi-scale fracture characteristics

Digital Microscopic Multiphase Heterogeneity Representation and Its Effects on Micromechanics and Cracking Behaviors of Geomaterials

Study on multi-scale damage and failure mechanism of rock fracture penetration: experimental and numerical analysis

Rock damage and fracture characteristics considering the interaction between holes and joints

Influence of intermittent opening density on mechanical behavior and fracture characteristics of 3D-printed rock

Mechanical behaviour and failure characteristics of rocks with composite defects of different angle fissures around hole

Experimental Study on the Effects of Stress-Induced Damage on the Microstructure and Mechanical Properties of Soft Rock

Numerical simulation and interpretation of the grain size effect on rock strength

Fractal Analysis and Its Impact Factors on Pore Structure of Artificial Cores Based on the Images Obtained Using Magnetic Resonance Imaging

Experimental investigation on mechanical properties and deformation mechanism of soft-hard interbedded rock-like material based on digital image correlation

Study on Macro–Meso Failure Mechanism of Pre-fractured Rock Specimens Under Uniaxial Compression

FINE STRUCTURE DESCRIPTION FOR FRACTURED ROCK MASS A NUMERICAL TESTS ON ITS ENGINEERING PROPERTIES