Abstract:This work reports a low-cost and easy manufactured optical fiber bubble Fabry–Perot (FP) interferometer (FPI) sensor with optimized manufacturing parameters. The microbubble sensor is fabricated by welding a multimode fiber (MMF) to a single-mode fiber (SMF), followed by hydrofluoric acid (HF) corroded and discharge treatment at the end of the MMF. The manufacturing process is explored and optimized. The optical power of the interference light was increased and forming stability of the bubbles was improved by controlling the corrosion time, type of arc discharge, discharge intensity, discharge time, and number of discharges. To study the relationship between the optical power and the subjected pressure and temperature, a theoretical model of sensing principle is established, and finite element simulation is carried out to analyze the deformation of bubbles under the influence of the external environment. Experimental results show that the sensor has a pressure sensitivity of dBm/MPa and a temperature sensitivity of dBm/°C. The study gives the influence of multiple preparation parameters on the quality of the sensor, which has good scientific value. The sensor has good prospects in pressure measurement.

An Optical Fiber Fabry–Perot Pressure Sensor Using Corrugated Diaphragm and Angle Polished Fiber

An Optical Fiber Fabry–Pérot Pressure Sensor Using an SU-8 Structure and Angle Polished Fiber

A MEMS-Based High-Fineness Fiber-Optic Fabry–Perot Pressure Sensor for High-Temperature Application

An Optical Fiber Pressure Sensor Based on F-P Interferometry and Intensity Demodulation

A Sensitivity-enhanced All-fiber Fabry-Perot High-pressure Sensor with a Hard-core Diaphragm

A Large-Range and High-Sensitivity Fiber-Optic Fabry–Perot Pressure Sensor Based on a Membrane-Hole-Base Structure

An Optical Fiber Fabry–Perot Pressure Sensor with Optimized Thin Microbubble Film Shaping for Sensitivity Enhancement

Diaphragm-Based Extrinsic Fabry-Perot Interferometric Optical Fiber Pressure Sensor

Optical Fiber Pressure Sensor Based on Corrugated Diaphragm Structure

Design and Simulation of Corrugated Diaphragm Applied to the MEMS Fiber Optic Pressure Sensor

Mechanical structure optimization design of fiber Fabry-Perot pressure sensor sensitive diaphragm

Monolithic Structure-Optical Fiber Sensor with Temperature Compensation for Pressure Measurement.

Optical Fiber Fabry-Perot Pressure Sensor Machined by Nd:YAG Laser

Highly Sensitive Temperature and Pressure Sensor Based on Fabry–Perot Interference

PDMS Diaphragm Based Miniature Fiber-Opticfabry-perot Dynamic Pressure Sensor Forturbomachinery Application

Microelectromechanical system based, high finesse, optical fiber Fabry–Perot interferometric pressure sensors

Miniature, high-sensitivity optical fiber pressure sensor based on all-silica Fabry-Perot interference

All-Silica Diaphragm-Based Optical Fiber Fabry-Perot Pressure Sensor Fabricated by CO2 Laser Melting Capillary End Face

An optical fiber Fabry–Pérot micro-pressure sensor based on beam-membrane structure

An Optical Fiber Fabry–Perot Pressure Sensor With Optimized Manufacturing Parameters

Fabry-Perot Cavity-Based High Sensitivity Fiber Optic Negative Pressure Sensor