Abstract:For conventional interleaved two-phase forward converters with a common output inductor, the maximum duty cycle is 0.5, which limits the voltage range and increases the difficulty of the transformer's optimization. A new two-phase hybrid forward converter with series-parallel auto-regulated transformer windings is presented in this paper. With interleaved control signals for the two phases, the secondary windings of the transformers can work in series when the duty cycle is larger than 0.5, and they can work in parallel when duty cycle is lower than 0.5. Therefore, the maximum duty cycle is extended and the turns ratio of the transformer can be optimized. Duty cycle dependent auto-regulated windings result in the steady states of the converter being different in different duty cycle ranges (D>0.5 and D<0.5). Fortunately, the steady state gains of the proposed hybrid converter are identical at different duty cycle ranges, which means a stepless shift between two states. A prototype is built to verify the theoretical analysis. A conventional control loop is compatible for the whole input voltage range and load range thanks to the stepless shifting between the different duty cycle ranges.

Interleaved Forward Converter With Series-Parallel Auto Regulated Secondary Windings

A New Interleaved Active-Clamp Forward Converter with Parallel Input and Series-Parallel Output

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

Two-phase hybrid forward convertor with series-parallel auto-regulated transformer windings and a common output inductor

Interleaved Phase-Shift Full-Bridge Converter With Transformer Winding Series–Parallel Autoregulated (SPAR) Current Doubler Rectifier

A Cascaded DC Converter with Primary Series Transformer LLC and Output Interleaved Buck

A hybrid ZVZCS phase-shift full-bridge converter with series/parallel auto-regulated transformer windings

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

A Three-Phase Interleaved Floating Output Boost Converter

A Hybrid Push-Pull Converter with Series-Parallel Structure in the Primary Windings

Series–Parallel Autoregulated Charge-Balancing Rectifier for Multioutput Light-Emitting Diode Driver

Interleaved ZVS Flyback-Forward converter with reduced output voltage stress on secondary rectifier diodes

A High Step-Up DC-DC Converter with Intermediate Capacitor and Coupled Inductors

A Three Phase Interleaved Boost Converter with L & C Voltage Extension Mechanism

Small Signal Modeling And Analysis Of Interleaved Active-Clamp Forward Converter With Parallel Input And Series-Parallel Output

Wide Input Voltage Isolated Dc-Dc Converter with Interleaving Control

Designing and Analysis of an Interleaved Boost Converter with Passive Lossless Clamp Circuits

Extra wide input voltage range and high efficiency DC-DC converter using hybrid modulation

Interleaved Boost Converters with Built-in Voltage-Doubler and Current Auto-Balance Characteristic

An Interleaved Three-Level Boost Converter