Abstract:For conventional interleaved two-phase forward converters with a common output inductor, the maximum duty cycle is 0.5, which limits the voltage range and increases the difficulty of the transformer's optimization. A new two-phase hybrid forward converter with series-parallel auto-regulated transformer windings is presented in this paper. With interleaved control signals for the two phases, the secondary windings of the transformers can work in series when the duty cycle is larger than 0.5, and they can work in parallel when duty cycle is lower than 0.5. Therefore, the maximum duty cycle is extended and the turns ratio of the transformer can be optimized. Duty cycle dependent auto-regulated windings result in the steady states of the converter being different in different duty cycle ranges (D>0.5 and D<0.5). Fortunately, the steady state gains of the proposed hybrid converter are identical at different duty cycle ranges, which means a stepless shift between two states. A prototype is built to verify the theoretical analysis. A conventional control loop is compatible for the whole input voltage range and load range thanks to the stepless shifting between the different duty cycle ranges.

A New Interleaved Active-Clamp Forward Converter with Parallel Input and Series-Parallel Output

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

Study of Interleave DC/DC Converter in Energy Feedback Electronic Power Load

Research of an Active Clamping Current-fed Half-bridge Converter with Input Parallel and Output Series

Small Signal Modeling And Analysis Of Interleaved Active-Clamp Forward Converter With Parallel Input And Series-Parallel Output

A Cascaded DC Converter with Primary Series Transformer LLC and Output Interleaved Buck

Interleaved Forward Converter With Series-Parallel Auto Regulated Secondary Windings

Two-phase hybrid forward convertor with series-parallel auto-regulated transformer windings and a common output inductor

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

A Hybrid Push-Pull Converter with Series-Parallel Structure in the Primary Windings

A Three-Phase Interleaved Floating Output Boost Converter

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

Designing and Analysis of an Interleaved Boost Converter with Passive Lossless Clamp Circuits

A hybrid ZVZCS phase-shift full-bridge converter with series/parallel auto-regulated transformer windings

A High Step-Up DC-DC Converter with Intermediate Capacitor and Coupled Inductors

A Three Phase Interleaved Boost Converter with L & C Voltage Extension Mechanism

Active-Clamp ZVZCS Resonant Forward DC Transformer (DCX) with Load-Adaptive ON-Time Control

An Isolated Active-clamp Interleaved Boost Converter

An Interleaved Active-Clamp Forward Converter Modified for Reduced Primary Conduction Loss Without Additional Components

An active clamp ZVT converter with input-parallel and output-series configuration

Interleaved Phase-Shift Full-Bridge Converter With Transformer Winding Series–Parallel Autoregulated (SPAR) Current Doubler Rectifier