Zero-Sequence Current Suppression Method for Fault-Tolerant OW-PMSM Drive with Asymmetric Zero-Sequence Voltage Injection
Chong Zhang,Chun Gan,Kai Ni,Zhiyue Yu,Yu Chen,Haochen Shi,Ronghai Qu
DOI: https://doi.org/10.1109/tie.2022.3167152
IF: 7.7
2022-01-01
IEEE Transactions on Industrial Electronics
Abstract:For the open winding permanent magnet synchronous motor (OW-PMSM) with leg open-circuit faults, a novel zero-sequence current (ZSC) suppression method with asymmetric zero-sequence voltage (ZSV) injection is proposed in this article. To realize the fault-tolerant control (FTC) in leg open-circuit fault conditions, the leg-sharing method is developed, where the output terminal of the faulty leg is connected to that of the remaining equivalent leg. However, the ZSC increases in the FTC mode, which causes severe torque ripple and system performance degradation. If the traditional ZSC suppression method is still adopted, the suppression performance is decreased. Besides, an undesired voltage vector is introduced, resulting in current distortion. To solve these problems, a novel ZSC suppression strategy is put forward. By asymmetrically adjusting the voltage output of the remaining legs, the ZSC of OW-PMSM in FTC mode can be effectively suppressed. Moreover, the proposed strategy is suitable for both the single-leg and double-leg FTC modes, where the ZSC suppression performance is almost the same as that of the traditional method in normal operation mode. Furthermore, experiments are performed on an OW-PMSM to verify the effectiveness of the proposed ZSC suppression scheme.
automation & control systems,engineering, electrical & electronic,instruments & instrumentation