Abstract:Summary form only given. The initial plasma and its spread speed have obvious influence on the dynamic characteristics of triggered vacuum switch (TVS). A special sensor is designed for measuring the initial charge of the trigger device of TVS in this paper, and the initial plasma diffusion characteristics are researched. The experimental results show that the diffusion velocity of the initial plasma charge increases with the increase of the steepness of the trigger current. When trigger current steepness increases 2 kA/μs, the maximum diffusion velocity of initial plasma increases reached to 150 cm/μs about.The results also show that 99.99% of the initial charge can be emitted into gap of TVS and be collected when the emitting angle θ of the initial charge is within the scope of 770 under the condition that the gap distance is 4mm and the diameter of collecting electrode is 40mm. The inherent relation between spreading time ts of initial plasma and trigger voltage, trigger current and trigger energy is researched, the experimental results show that spreading time ts decreases with the increase of the trigger voltage Utr, trigger current Itr and trigger energy Wtr. But when the trigger voltage Utr, trigger current Itr and trigger energy Wt increase to some extent, the spreading time ts reduces and keeps to a relative stable level. Keeping the DC bias voltage is zero, the trigger voltage Utr at 2.6 kV and the gap distance Dgap at 1 mm, the spreading time ts of the initial plasma is about 50ns, while the gap distance Dgap is 8mm, the spreading time ts increases to about 80ns. This research work will lay important theoretical basis for high performance discharge switched, over-voltage protection gap, high voltage and high current test technology and test systems.

Research on Conduction Characteristics of Plate Electrode Type Laser Triggered Vacuum Switch

Characterization of the Laser-Triggered Vacuum Switches

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

A Triggered Spark-Gap Switch for High-Repetition Rate High-Voltage Pulse Generation

Experimental Study of the Laser-Triggered Discharge for the Application in a Gap Switch

A High-Voltage and High-Current Triggered Vacuum Switch

Research on the trigger process of surface flashover triggered vacuum switch

Design and characteristics of a fiber laser powered repetitive micro-plasma jet triggered gas switch

Analysis of the Trigger Characteristics for a Pseudospark Switch Triggered by Nanosecond Focused Laser

Experimental Study on Triggering Characteristics of a Surface Flashover Triggered Vacuum Switch

Experimental study of vacuum switch applied in pulse source system

An Experimental Study on Initial Plasma Characteristics of Surface Flashover Triggered Vacuum Switch

Design and Performance of a Plasma-Jet Triggered Graphite Trigatron Switch

Study on Pseudospark Switch Triggered by 532-Nm Focused Laser

Influence of Trigger Pulse on the Trigger Characteristics of Surface Flashover Trigger Vacuum Switch

Experimental Investigations on Trigger Characteristics of Pseudospark Switch Based on Surface Flashover Technology

Spreading of the initial plasma of triggered vacuum switch

Experiment Investigation on Triggered Vacuum Arc under the Different Contact Materials

An Experimental Investigation on Initial Plasma Characteristics of Triggered Vacuum Switch

Repetitive high-power discharge operation of a micro-laser triggered gas switch