Abstract:In this paper, we have proposed and experimentally demonstrated an optical fiber current sensing system based on optical carrier microwave interferometry (OCMI) technology and the virtual Vernier effect. The OCMI pattern in the electric domain is formed by the interference of optical carrier microwave signals reflected by two fiber Bragg gratings (FBGs). One FBG is attached to a giant magnetostrictive material (GMM): Terfenol-D as the sensing element, while the other one serves as the reference element. Current changes will cause axial tensile strain of the sensing FBG on the material and thus the wavelength of the sensing FBG will change, which will lead to a shift of the frequency of resonance dip of the OCMI pattern in the electric domain. By monitoring the frequency shift, the current change can be demodulated. Two FBGs with different distances (∼ 27 cm and ∼ 5 m) are employed in the experiment, which results in different FSRs and thus sensitivities of the proposed system. In the experiment, we obtained current sensitivities of −111.21 MHz/A and −2.65 MHz/A with increasing current when distances between two FBGs are ∼ 27 cm and ∼ 5 m, respectively. To further increase the sensitivity and improve the flexibility of the proposed system, the virtual Vernier effect is incorporated for the sensing system with FBGs’ distance of ∼ 5 m, without requiring an actual reference interferometer. When increasing current, the sensitivities are 19.82 MHz/A and 32.70 MHz/A by utilizing the virtual fundamental Vernier effect (FVE) and the virtual 1st-order harmonic Vernier effect (HVE), respectively. The proposed sensing system offers advantages such as tunable sensitivity, good repeatability and stability, high resolution, simple structure, and so on.

DC Characteristics of the Symmetric Spiral Nested Full Optical Fiber Low Current Sensor

Interferometric Fiber-Optic Current Sensor

Fiber Fusion Splicing Error Analysis of All-Fiber Optic Current Sensor with Different Demodulation Schemes

Influence of Imperfect Faraday Rotation Mirror on All-Fiber Optic Current Sensor.

Structure design and simulation research on a new type of optical current sensor

Study on simulation of fiber optic current sensor

Structure design and simulation study on line, solenoids nested and mutiple-reflection optical channels type optical fiber current sensor

Highly Sensitive and Reconfigurable Fiber Optic Current Sensor by Optical Recirculating in a Fiber Loop.

Fiber Optic Current Sensor with High Sensitivity Based on Recirculating-Loop Configuration Using Standard SMF

High Sensitivity Fiber Optic Current Sensor Based on Recirculating Fiber Loop

Study on Temperature and Current Sensors Based on Optical Driving Optical Fiber Transmission

Resonant Fiber Optic Current Sensor Based on Broadband Light Source

Fiber-optic current sensing system by using optical carrier microwave interferometry technology and virtual Vernier effect

Mixed-Type Optical Fiber Current Sensor

A Quasi-Distributed All-Fiber Current Sensor Based on Series Structure

Dual-Channel Fiber Optic Current Sensor Based on Two-Carrier Modulation Technique

Self-Compensative Fiber Optic Current Sensor

Recent Progress of All-Fiber Optic Current Sensors

DC current sensor based upon a fused fiber optic Fabry-Perot interferometer (FPI) and copper wire

Fiber-Optic Sensor for MA Current Measuring

Faraday Optical Fiber Current Sensor with Phase Conjugate Device