Abstract:In this paper, we have proposed and experimentally demonstrated an optical fiber current sensing system based on optical carrier microwave interferometry (OCMI) technology and the virtual Vernier effect. The OCMI pattern in the electric domain is formed by the interference of optical carrier microwave signals reflected by two fiber Bragg gratings (FBGs). One FBG is attached to a giant magnetostrictive material (GMM): Terfenol-D as the sensing element, while the other one serves as the reference element. Current changes will cause axial tensile strain of the sensing FBG on the material and thus the wavelength of the sensing FBG will change, which will lead to a shift of the frequency of resonance dip of the OCMI pattern in the electric domain. By monitoring the frequency shift, the current change can be demodulated. Two FBGs with different distances (∼ 27 cm and ∼ 5 m) are employed in the experiment, which results in different FSRs and thus sensitivities of the proposed system. In the experiment, we obtained current sensitivities of −111.21 MHz/A and −2.65 MHz/A with increasing current when distances between two FBGs are ∼ 27 cm and ∼ 5 m, respectively. To further increase the sensitivity and improve the flexibility of the proposed system, the virtual Vernier effect is incorporated for the sensing system with FBGs’ distance of ∼ 5 m, without requiring an actual reference interferometer. When increasing current, the sensitivities are 19.82 MHz/A and 32.70 MHz/A by utilizing the virtual fundamental Vernier effect (FVE) and the virtual 1st-order harmonic Vernier effect (HVE), respectively. The proposed sensing system offers advantages such as tunable sensitivity, good repeatability and stability, high resolution, simple structure, and so on.

Resonant Fiber Optic Current Sensor Based on Broadband Light Source

Fiber Optic Current Sensor Based on Resonance Frequency Difference Detection

Interferometric Fiber-Optic Current Sensor

Fiber Optic Current Sensor with High Sensitivity Based on Recirculating-Loop Configuration Using Standard SMF

High Sensitivity Fiber Optic Current Sensor Based on Recirculating Fiber Loop

Fiber-optic current sensing system by using optical carrier microwave interferometry technology and virtual Vernier effect

Ultra-sensitive Silicon Photonic Current Sensor Using a Ring Resonator

Fiber Optic Current Sensor Based on Special Spun Highly Birefringent Fiber

Highly Sensitive and Reconfigurable Fiber Optic Current Sensor by Optical Recirculating in a Fiber Loop.

Study on simulation of fiber optic current sensor

Simultaneous Current and Vibration Measurement Based on Interferometric Fiber Optic Sensor

Dual-Channel Fiber Optic Current Sensor Based on Two-Carrier Modulation Technique

High-current-sensitivity all-fiber current sensor based on fiber loop architecture.

Fiber-Optic Sensor for MA Current Measuring

Novel Optical Fiber Current Sensor Based on Magnetic Fluid

High-sensitivity sensor fabricated on the basis of single-mode fiber loop using frequency-sweeping-generated ringing effect

Design Of Vibration-Insensitive Sagnac Fiber-Optic Current Sensors Using Spun High-Birefringence Fibers

Study on Temperature and Current Sensors Based on Optical Driving Optical Fiber Transmission

Novel Fiber Optic Current Transformer With New Phase Modulation Method

A Current Sensor Based on Capillary Microresonator Filled with Terfenol-D Nanoparticles

A special spun birefringent fiber optic current sensor