Abstract:Current sensors based on the fluxgate magnetic field meter and feedback zero-field operating principle have excellent current measurement accuracy and linearity in a large range of up to thousands of amperes. An excitation current (${I}_{e}$ ) is employed in a magnetic fluxgate sensor to magnetize the magnetic core periodically, which will generate magnetization distortion that affects the performance of the sensor. This article proposes a novel scheme for suppressing the magnetization distortion through electrical compensation. The source of the magnetization distortion is theoretically derived and analyzed. It is found that the magnetization distortion is a function of the excitation current ${I}_{e}$ and is not affected by the primary current. Since ${I}_{e}$ is a periodical current that is determined by the parameters of the sensor itself, it is feasible to inject a specified periodical current to the output port of the sensor to cancel the magnetization distortion. Compared with the magnetization distortion compensation method with an additional core and coil, this method does not need to pair the cores or coils, which significantly reduces the complexity of the production process and saves space for the sensor. A prototype sensor with electrical compensation is designed, fabricated, and tested. Experimental results show that the compensation setting significantly suppresses the magnetization distortion signal. The amplitude of the basic frequency component is reduced from 24 to $6.8 ~\mu \text{V}$ . The other odd harmonics of the magnetization distortion are also reduced. The electrical compensation method works properly in a large current range from −1.5 to 1.5 kA. The scale accuracy of the prototype sensor is less than 5.7 ppm (parts per million). The compensation method can suppress the magnetization distortion to a similar level with operating temperature changes from room temperature to 50 °C.

Self-Calibration Measurement Method for Optical Current Transducer with Magnetic Concentrator Ring

Study of No-liquid Calibration Technique for the Medium-and-large Diameter Electromagnetic Flowmeter

Dry Calibration Technique of Electromagnetic Flowmeters

Study of Current Measurement Method Based on Circular Magnetic Field Sensing Array

Magnetic Field Estimation in Measurement Dead Domain for Dry Calibration of Electromagnetic Flowmeter

A Non-Contact Micro-Ampere DC Current Digital Sensor Based on the Open-Loop Structure

Contactless Current Measurement for Enclosed Multiconductor Systems Based on Sensor Array.

Design and Hardware Experiment of Concentrating Magnetic Ring of Current Sensors Used in Open-Loop Fluxgate

Electrical Compensation for Magnetization Distortion of Magnetic Fluxgate Current Sensor

A Self-Healing Magnetic-Array-Type Current Sensor With Data-Driven Identification of Abnormal Magnetic Measurement Units

A New Current Measurement Method Based on Circular Tunneling Magnetoresistive Sensor Array

Active on-site calibration technology of current transformer based on non-rated frequency current injection

Principle and Application of Sensitivity Calibration by Single Particle for Current Detector

A high accuracy current comparator with electronic compensation

Measurement of current distribution using infrared thermography

Wideband Current Transducer Traceable Calibration up to 10 A and 1 MHz

Large bandwidth and dynamic range current sensor based on micro-PCB Rogowski coil

Research on optical fiber current transducer using nv center in diamond

Measuring magnetic field coil constants based on atomic magnetometry and fluxgate magnetometry

Design of Heart-Shaped Current Sensor Based on Incomplete Magnetic Cancellation