Abstract:In a low-temperature environment, the actuation performance of the piezoelectric stack results from the synergic action of the thermo-electro-mechanical field; the actuation performance is influenced by the change in temperature, compressive preload, and excitation voltage. A special and novel instrumentation system is proposed and developed in this study to measure the relationship between the actuation performance of the piezoelectric stack and the change in temperature, preload, and voltage. The bending strain of the cantilever beam driven by the piezoelectric stack reflects its actuation performance, and the corresponding theoretical model is established to optimize the experimental conditions and maximize the strain and signal-to-noise ratio. Based on the experimental results, it can be seen that the actuation performance of the piezoelectric stack increases linearly with the excitation voltage under different temperatures and preload conditions. The static actuation performance increased by 79%-90% when the prestress increased from 0 to 6 MPa, corresponding to a decrease of 15%-30% when the temperature decreased from 20 to -70 °C, and the dynamic actuation performance decreased with an increase in the frequency of the excitation voltage. Consequently, the design methods and ideas are informative to develop an instrumentation system that can measure the influence of thermo-electro-mechanical synergistic effects on the actuation performance of piezoelectric stacks under different temperatures, preloads, and voltages.

An adjustable pre-stress based sensitivity enhancement scheme for cantilever-based resonant sensors

Approaches To Increasing Surface Stress For Improving Signal-To-Noise Ratio Of Microcantilever Sensors

Mechanical and Electronic Approaches to Improve the Sensitivity of Microcantilever Sensors.

Design of Piezoresistive Micro-Cantilever with Stress Concentration Regions

Electrostatic Charge Sensor Based on Micro Resonator with Sensing Scheme of Effective Stiffness Perturbation

A resonant magnetic microsensor based on magnetic torque with piezoresistive readout

Design of a Hybrid Micro/Nano Cantilever-based Resonant Sensor and its Fabrication Method

Thermo-electro-mechanical Synergistic Effect on the Actuation Performance of Piezoelectric Stack

Design and characterization of high-sensitivity cantilevers

Tailoring Stresses in Piezoresistive Microcantilevers for Enhanced Surface Stress Sensing: Insights from Topology Optimization

A Magnetic Tuning Mechanism to Compensate Frequency Ratio Deviation in Coupled Resonators for Improving Sensing Resolution With High Sensitivity

Mechanically Coupled Synchronized Resonators for Resonant Sensing Applications

Integrated tuning fork nanocavity optomechanical transducers with high $f_{M}Q_{M}$ product and stress-engineered frequency tuning

Developing Highly Sensitive SAW Standing Wave Magnetic Sensor through Resonant Frequency Shift and Acoustic Energy Concentration

Sensitivity Manipulation on Micro-Machined Resonant Electrometer Toward High Resolution and Large Dynamic Range

Enhanced magnetoelectric effect in a stress-biased lead magnesium niobate-lead titanate single crystal/Terfenol-D alloy magnetoelectric sensor

Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors

Electrical Adjustment on a MEMS Double-Ended-tuning-fork Resonator

High Accuracy Resonant Pressure Sensor With Balanced-Mass DETF Resonator and Twinborn Diaphragms

Passive Particle Jamming Variable Stiffness Material‐Based Flexible Capacitive Stress Sensor with High Sensitivity and Large Measurement Limit

Design and Optimization of SOI Piezoresistive Microcantilever Sensors for Use in Surface Stress Measurement