Abstract:CO2-expanded organic solvent is a kind of important fluid medium and has broad applications in chemical industry, environmental protection and other fields. Ultrasonic cavitation in gas expanded liquids (GXLs) is conducive to enhancing mass transfer and producing many exciting phenomena. In this paper, the ultrasonic cavitations and streaming in the saturated CO2-expanded liquid N, N-dimethylformamide (DMF) at 4.2 MPa and 5.2 MPa are observed by a high-speed camera. The cavitation intensity and time trace of pressure pulses are recorded using a PZT hydrophone. The influences of gas-liquid equilibrium pressure and ultrasonic power on the cluster dynamics of transient and stable cavitation are examined. The excess molar enthalpies required for CO(2 )dissociation from DMF are calculated by Peng-Robinson equations of state and the change of surface free energy of CO2-expanded DMF is predicted. The results show that the excess enthalpy of the mixture is one of the key factors to control ultrasonic cavitation at high pressurized conditions, while the surface tension is the key factor for low pressure. As the increase of applied ultrasonic power, the formation and collapsing frequency of bubble clusters increases, and the amplitude and cyclic frequency of pressure pulse are enhanced. The transient cavitation intensity increases as it reaches a maximum value at a certain ultrasonic power and then decreases. The change trends of stable cavitation intensity under different pressures are basically same. It can be concluded from the evidence that ultrasonic cavitation in CO2-expanded DMF is affected by the combined effect of compression and substitution: compression depresses the nucleation and growth of bubbles, while the high solubility of CO2 in DMF is conducive to the generation of bubbles in cavitation.

Rheological Properties of HDPE and LDPE at the Low-Frequency Range under Supercritical CO2

Pressure Dependence of the Co2/Propylene Oxide Copolymerization Catalyzed by Zinc Glutarate

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

The Influence of Pressure on the Acoustic Cavitation in Saturated CO2-expanded N, N-dimethylformamide

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Batch foaming of ultra-high molecular weight polyethylene with supercritical carbon dioxide: Influence of temperature and pressure

Influence of Reduced Graphene Oxide on the Rheological Response and Chain Orientation on Shear Deformation of High Density Polyethylene

Thermodynamic behavior and crystal structure of polypropylene treated with supercritical carbon dioxide

Effect of Supercritical Carbon Dioxide on the Crystallization Behavior of Poly(ether Ether Ketone)

Temperature, time, pressure, and CO 2 concentration dependence of rheological properties for poly(methyl methacrylate)/expanded graphite composites

Dynamic Rheological Properties for HDPE/CB Composite Melts

Crystallization and Morphology of Star-Shaped Polyethylenoxyde- B -Polycaprolactone under High Pressure Carbon Dioxide

Rheological Properties of Thermoplastic Polymers with Dissolved Gases for Foaming Applications

Mechanical Properties and Volume Dilatation of HDPE/CaCO3 Blends with and Without Impact Modifier

Study on the shear viscosity of hdpe-wood composites/supercritical co 2 solution

Structure-rheology properties of polyethylenes with varying macromolecular architectures

Insight into the Influence of Properties of Poly(Ethylene-co-octene) with Different Chain Structures on Their Cell Morphology and Dimensional Stability Foamed by Supercritical CO2

Understanding the Impact of Chain Mobility on Conformational Evolution and Kinetics of Mesophase Formation in Poly(ʟ-lactide) under Low-Pressure CO2

Estimation of the Effects of CO2 and Temperature on the Swelling of PS-CO2 Mixtures at Supercritical Conditions on Rheological Testing

Rheological Behaviors of Randomly Crosslinked Low Density Polyethylene and Its Gel Network

Compressive Properties and Constitutive Model of Semicrystalline Polyethylene.