Abstract:In memory semiconductors such as a static random access memory (SRAM), a common problem is soft errors under radiation environment. These soft errors cause bit flips, which are referred to as single event upsets (SEUs). Some radiation-hardened SRAM cells such as a Quatro SRAM, we-Quatro SRAM, and DICE SRAM cells have been reported for years. However, these designs have the disadvantage of taking up more area than a conventional 6T SRAM cell. Thus, we propose a radiation-hardened SRAM cell design that we named capacitor-static random access memory (C-SRAM) without area overhead. The C-SRAM is formed by simply adding a capacitor to the conventional 6T SRAM. It was designed to mitigate the radiation effect using the conservation law of electrical charge. Moreover, it has the same cell size as the conventional 6T SRAM cell. Its static noise margins (SNMs), which are indicators of operational stability, are equal to the conventional 6T SRAM values of 530 mV, 220 mV, and 860 mV in hold, read, and write modes, respectively. The results of the SEU simulation test showed that it had 4.761 times better flipping tolerance than the conventional 6T SRAM with a charge value of 247.494 fC. In addition, irradiation experiments also confirmed that the C-SRAM cell was more tolerant than the 6T SRAM cell. The conventional 6T SRAM and C-SRAM were fabricated using a standard 0.18 μm CMOS process.

A Radiation Harden Enhanced Quatro (RHEQ) SRAM Cell

Radiation-Hardened 14T SRAM Bitcell with Speed and Power Optimized for Space Application

Radiation-Hardened 0.3–0.9-V Voltage-Scalable 14T SRAM and Peripheral Circuit in 28-Nm Technology for Space Applications

A Highly Reliable Radiation Hardened 8T SRAM Cell Design

Simulation and Research on a 4T-Cell Based Duplication Redundancy SRAM for SEU Radiation Hardening

Radiation Hardened 12T SRAM with Crossbar-Based Peripheral Circuit in 28nm CMOS Technology

Design of Highly Reliable 14T and 16T SRAM Cells Combined with Layout Harden Technique

Low Power and High Write Speed SEU Tolerant SRAM Data Cell Design

Design of polarity hardening SRAM for mitigating single event multiple node upsets

A Novel Single Event Upset Hardened Cmos Sram Cell

Single-Event Multiple Effect Tolerant RHBD14T SRAM Cell Design for Space Applications

A Radiation Hardened SRAM in 180-nm RHBD Technology.

A Novel Highly Reliable and Low-Power Radiation Hardened SRAM Bit-Cell Design

A Reliable and high performance Radiation Hardened Schmitt Trigger 12T SRAM cell for space applications

A highly stable and low‐cost 12T radiation hardened SRAM cell design for aerospace application

Novel Radiation-Hardened Designs of Hybrid Spintronic/CMOS Circuit for Multi-Node Upset Tolerance

Radiation tolerant capacitor-SRAM without area overhead

Area-efficient Radiation-Hardened 6 T SOI SRAM Cell Design Using TDBC Transistors

Testing of a new type SEU-tolerant SRAM

An SEU Hardened 65Nm/4t-Sram Cell for High Reliable Space Applications

A Novel Seu Hardened Sram Bit-Cell Design