Abstract:Although doubly fed induction generators (DFIG) are widely used, difficulties in early fault detection and severity assessment for inter-turn short-circuit (ITSC) faults are highly prominent. In this manuscript, a novel incipient fault detection and state assessment method based on external leakage flux sensing and modified multiscale poincare plots (MMSPP) is proposed. An external leakage flux sensor is placed on the axial-end position of the generator to monitor the presence and evolution of ITSC faults. Multiscale poincare mapping is a novel nonlinear tool that is further developed and modified using the normal cumulative distribution function and multiscale computing methods to capture the behavior evolution and changes in the generator's external leakage flux signals. The healthy indicator is based on the analysis of elliptical orbit features extracted from MMSPP, established by support vector data description with parameter optimization. The effectiveness of the proposed method was implemented and verified under an experimental environment on a 100 kW DFIG platform to detect incipient inter-turn short circuits (mainly considering the two-turn ITSC) and evaluate the performance degradation (three- to eight-turn ITSC) with 0%, 50%, and 100% different load conditions. The experimental results showed the viability of the approach and fault indicator for incipient fault detection and condition assessment of the wind generator's low inter-turn insulation faults and for relative quantification of ITSC fault severity.

Multiple Open-Circuit Fault Diagnosis Based on Multistate Data Processing and Subsection Fluctuation Analysis for Photovoltaic Inverter.

A Comparative Study of Two Diagnostic Methods Based on the Switching Voltage Pattern for Igbt Open-Circuit Faults in Voltage-Source Inverters

Open-transistor Faults Diagnosis in Voltage-Source Inverter Based on Phase Voltages with Sliding-Window Counting Method.

A Novel Fault Diagnosis Scheme for PV Plants Based on Real-Time System State Identification

Model-Based Development of a Diagnostic Algorithm for Central Inverter Thermal Management System Fault Detection and Isolation

A Fast MPPT-based Anomaly Detection and Accurate Fault Diagnosis Technique for PV Arrays

Fast Transistor Open-Circuit Faults Diagnosis in Grid-Tied Three-Phase VSIs Based on Average Bridge Arm Pole-to-Pole Voltages and Error-Adaptive Thresholds

Fast Diagnosis of Multiple Open-Circuit Faults in a T-type Inverter Based on Voltages Across Half-Bridge Switches

Real-time Diagnosis of Open Circuit Faults in Three-Phase Voltage Source Inverters

Real-time Diagnosis of Multiple Transistor Open-Circuit Faults in a T-type Inverter Based on Finite-State Machine Model

L- and LCL-Filtered Grid-Tied Single-Phase Inverter Transistor Open-Circuit Fault Diagnosis Based on Post-Fault Reconfiguration Algorithms

A Method Based on NGO-HKELM for the Autonomous Diagnosis of Semiconductor Power Switch Open-Circuit Faults in Three-Phase Grid-Connected Photovoltaic Inverters

Incipient Fault Detection and Condition Assessment in DFIGs Based on External Leakage Flux Sensing and Modified Multiscale Poincare Plots Analysis

A Voltage Vector Residual Estimation Method Based on Current Path Tracking for T-Type Inverter Open-Circuit Fault Diagnosis

A Fast Average Model-Based Method for IGBT and Current Sensor Fault Diagnosis in Grid- Tied Inverters.

An Average Model-Based Transistor Open-Circuit Fault Diagnosis Method for Grid- Tied Single-Phase Inverter

Fast simulation modeling and multiple-PS fault diagnosis of the PV array based on I–V curve conversion

Multiple Open-Switch Fault Diagnosis for Three-Phase Four-Leg Inverter under Unbalanced Loads via Interval Sliding Mode Observer

Inverter open circuit fault diagnosis based on residual performance evaluation

Fault Diagnosis and Classification in Photovoltaic Systems Using SCADA Data

Four-state active fault diagnosis method for cascaded H-bridge multilevel inverter