Abstract:In order to solve the problem of abundant renewable energy in the areas where wind farms and photovoltaic power stations with limited local consumption capacity are located in China. The state has planned and constructed several VSC-HVDC grid projects to realize the access of renewable energy to the grid. Due to the complex structure of the flexible DC network, the research of operating characteristics of its devices is very important. Among them, the converter transformer, as an important equipment connecting AC and DC systems. It is necessary to research its operating characteristics under different working conditions. AC harmonics in converter station can be generated by DC converter, which make the impact of harmonics on the converter transformer cannot be ignored. A project is a ±500kV symmetrical true bipolar four-terminal ring grid structure,which using half-bridge type sub-module MMC, DC circuit breaker and overhead lines for power transmission. The overhead lines occur monopolar grounding and bipolar short circuit faults easily, and multiple faults also occur in the commutation valve. Through simulation software, a ±500kV flexible and straight grid engineering simulation model is built to simulate and analyze the voltage and current on the valve side of the converter transformer under the above-mentioned fault conditions, and also calculate the amplitude of the harmonic components of the voltage and current. The effect of bridge arm reactors and the number of submodule MMC on the overvoltage and harmonic components are simulated and analyzed.

Study on Suppressing Harmonic Flux Density of Converter Transformer Core under the DC Bias.

A magnetic-mechanical strong coupling FEM model and vibration characteristic analysis of transformer core under DC bias

Analysis of Excitation Characteristics of Transformers with Different Core Shapes under Severe DC Bias

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter

Analysis of Harmonic Current and Winding Vibration in Converter Transformer

3D FEM Simulation Study of a Single-Phase Three-Limb Transformer under DC Bias

Experimental Study On Dc Biasing Impact On Transformer'S Vibration And Sound

A Continuously Magnetic Valve Arc-Suppression Coil and Its Modeling

Electromagnetic Vibration Characteristics of High-Frequency Transformer under DC Bias with Different Winding Structures

Simulation and Analysis of High Frequency Harmonic Components of Voltage and Current of Converter Transformer in Flexible DC System

Iron Loss and Temperature Rise Analysis of a Transformer Core Considering Vector Magnetic Hysteresis Characteristics under Direct Current Bias

An Analog-based, Duty Cycle Modulation Method to Remove the DC Bias in the Transformer for a Dual Active Bridge Converter

Study on the Electromagnetic Thermal Coupling Analysis Method for Valve Side Bushing of Converter Transformer under Multi-frequency Harmonic Current

An Improved Vector Hysteresis Model Incorporating the Effect of DC-Biased Field and its Application to FEM Analysis of Three-Limb Transformer Core

Research on power transformer vibration and noise under DC bias condition

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems

Vibration characteristic analysis of transformers influenced by DC bias based on vibration half-wave energy method

Loss Calculation of Iron Core under DC Bias and Harmonic Disturbance Conditions

Numerical Analysis Of Lightning Transient Voltage Distributions In Hv Converter Transformer Winding

Simulation and Experimental Analysis of Single-phase Transformers under DC Bias

Analysis of Fine Fault Electrothermal Characteristics of Converter Transformer Reduced-Scale Model