Abstract:This article presents an area and power-efficient system-on-chip (SoC) for vital signs monitoring to provide patients with remote monitoring. It measures five important vitals including blood oxygen saturation (SpO2), respiration rate (RR), heart rate (HR), HR variability (HRV), and temperature. The proposed SoC utilizes a photoplethysmography (PPG) signal to compute HR, HRV, SpO2, and RR. The PPG signal is amplified and filtered using a PPG readout that includes a transimpedance amplifier (TIA) with a switched integrator (SI) to filter and amplify the signal. A differential second-order, delta-sigma analog-to-digital converter ( -ADC) is adopted to digitize the PPG signal. The SoC also comprises a low-power LED driver for both red and infrared (IR) LEDs which operate in pulsed mode with a 0.625% duty cycle. A vital signs extractor performs feature extraction (FE) and computes the vital signs with a maximum absolute error of less than 1%. In this work, the temperature is also measured by employing a Wheatstone bridge (WhB)-based temperature sensor which integrates thermal resistors into a second-order -ADC. The proposed system shares -ADC for digitizing the PPG signal and the temperature readings to reduce both area and power consumption. The proposed system computes the temperature over the human's temperature range ( C to C) with an accuracy of +/ C. The SoC is implemented using a 180 nm CMOS process with an area of 4.8 mm2 while consuming W.

A 93μw 11mbps Wireless Vital Signs Monitoring SoC with 3-Lead ECG, Bio-Impedance, and Body Temperature.

A 74-μW 11-Mb/s Wireless Vital Signs Monitoring SoC for Three-Lead ECG, Respiration Rate, and Body Temperature

[Development of a Wireless Multiple Physiological Parameters Monitoring System].

A 0.7-V 17.4- μ W 3-lead wireless ECG SoC

A 0.7-V 17.4-/Spl Mu/w 3-Lead Wireless ECG SoC

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

A Wearable Health Monitoring System with Multi-Parameters

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

A Fully Integrated Wireless SoC for In-Body Ph and Temperature Continuous Monitoring

A 769 Μw Battery-Powered Single-Chip SoC with BLE for Multi-Modal Vital Sign Monitoring Health Patches.

A 206 μW Vital Signs Monitoring System on Chip for Measuring Five Vitals

A CMOS Physiological Monitoring Frontend for Wearable Health Applications

22.1 A 769μw Battery-Powered Single-Chip SoC with BLE for Multi-Modal Vital Sign Health Patches

A 1.92 Μa Always-on ECG Monitoring Mixed-Signal SoC for Implantable Medical Application.

An Ultra-Low Power ECG Acquisition and Monitoring ASIC System for WBAN Applications

A Wireless Biomedical Signal Interface System-On-Chip For Body Sensor Networks

An ECG-on-Chip for Wearable Cardiac Monitoring Devices

Design and development of an ecg monitoring system based on wireless system-on-chip technology

Signal Processing System-on-chip Design for Biomedical Applications.