Abstract:This article presents an area and power-efficient system-on-chip (SoC) for vital signs monitoring to provide patients with remote monitoring. It measures five important vitals including blood oxygen saturation (SpO2), respiration rate (RR), heart rate (HR), HR variability (HRV), and temperature. The proposed SoC utilizes a photoplethysmography (PPG) signal to compute HR, HRV, SpO2, and RR. The PPG signal is amplified and filtered using a PPG readout that includes a transimpedance amplifier (TIA) with a switched integrator (SI) to filter and amplify the signal. A differential second-order, delta-sigma analog-to-digital converter ( -ADC) is adopted to digitize the PPG signal. The SoC also comprises a low-power LED driver for both red and infrared (IR) LEDs which operate in pulsed mode with a 0.625% duty cycle. A vital signs extractor performs feature extraction (FE) and computes the vital signs with a maximum absolute error of less than 1%. In this work, the temperature is also measured by employing a Wheatstone bridge (WhB)-based temperature sensor which integrates thermal resistors into a second-order -ADC. The proposed system shares -ADC for digitizing the PPG signal and the temperature readings to reduce both area and power consumption. The proposed system computes the temperature over the human's temperature range ( C to C) with an accuracy of +/ C. The SoC is implemented using a 180 nm CMOS process with an area of 4.8 mm2 while consuming W.

A 769 Μw Battery-Powered Single-Chip SoC with BLE for Multi-Modal Vital Sign Monitoring Health Patches.

22.1 A 769μw Battery-Powered Single-Chip SoC with BLE for Multi-Modal Vital Sign Health Patches

An ASIC Solution for Intelligent Electrodes and Active-Cable Used in a Wearable ECG Monitoring System.

A Multi-Parameter Bio-Electric ASIC Sensor with Integrated 2-Wire Data Transmission Protocol for Wearable Healthcare System

A System-on-chip and Paper-Based Inkjet Printed Electrodes for a Hybrid Wearable Bio-Sensing System

Design of a self-organized Intelligent Electrode for synchronous measurement of multiple bio-signals in a wearable healthcare monitoring system

An Active-Cable Connected ECG Monitoring System for Ubiquitous Healthcare

A Wearable Health Monitoring System with Multi-Parameters

A 0.7-V 17.4-/Spl Mu/w 3-Lead Wireless ECG SoC

A 74-μW 11-Mb/s Wireless Vital Signs Monitoring SoC for Three-Lead ECG, Respiration Rate, and Body Temperature

An ECG-on-Chip for Wearable Cardiac Monitoring Devices

A 0.7-V 17.4- μ W 3-lead wireless ECG SoC

A 206 μW Vital Signs Monitoring System on Chip for Measuring Five Vitals

A Low-Power, Wireless, Real-Time, Wearable Healthcare System

[An Ultra-Low Power, Wearable, Long-Term ECG Monitoring System with Mass Storage].

A 1.92 Μa Always-on ECG Monitoring Mixed-Signal SoC for Implantable Medical Application.

Low-Power Wireless Wearable ECG Monitoring Chestbelt Based on Ferroelectric Microprocessor

A Wearable ECG Monitoring Device with Flexible Embedded Denoising and Compression

Signal Processing System-on-chip Design for Biomedical Applications.

An Energy-Efficient Soc For Closed-Loop Medical Monitoring And Intervention

Low-Power Wireless Wearable Ecg Monitoring System Based On Bmd101