Abstract:Micro and Nano-technologies need precision machines that can produce motion accuracy down to micro/nano-meter range. At the same time, these machines have to operate at high speeds to yield high productivity. Such an increasingly tight control performance requirement puts a significant challenge to control community and forces control engineers to look beyond traditional linear control theory for more advanced nonlinear controllers. This research is to present an advanced nonlinear adaptive robust control approach to achieve micro/nanometer level positioning accuracy for micro/nano-manipulation type applications. In addition, the proposed control strategy is implemented on a commercial linear motor drive system with a position measurement resolution of 20 nanometers by an external laser interferometer. Experimental results for both long-range high-speed/high-acceleration motions and short-range slow motions are presented to demonstrate the precision motion that can be achieved by the proposed method and various practical issues that remain to be solved. It is found that for motions with a maximum speed of 2 m/sec and maximum acceleration of 45 m/sec2, the steady state position tracking error is within the linear encoder resolution of 0.5 μm when the system comes to a stop and within 5 μm during the 2 m/sec constant speed period. Furthermore, the maximal position tracking during the entire motion is mostly within 20μm. For slow motions with a maximal speed of only 0.0002m/sec, the steady state position tracking error with the external laser interferometer position measurement is mostly within 0.1 μm when the system comes to a stop and within 0.2 μm during the constant low speed period, and the maximal position tracking during the entire motion is within 2μm.

Development of an End-Effector Mounted Tracking Methodology for Feedback Control of High Precision 3-DOF Planar Motions

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide.

A Novel Laser Tracking Testbed For Robot Trajectory Errors

Development of a Large-Range XY-Compliant Micropositioning Stage with Laser-Based Sensing and Active Disturbance Rejection Control

Development of A Passive Compliant Mechanism for Measurement of Micro/Nanoscale Planar 3-Dof Motions

Design and tracking control of a large-range reluctance-actuated compliant nano-manipulator

A Novel Piezoelectrically Actuated 2-Dof Compliant Micro/Nano-Positioning Stage with Multi-Level Amplification

Design and control of a decoupled two degree of freedom translational parallel micro-positioning stage

Real Time Pose Control of an Industrial Robotic System for Machining of Large Scale Components in Aerospace Industry Using Laser Tracker System

Design, Control of an Aerostatic X-Y Planar Motion Stage for Precision Positioning

Large Range Tracking of an XY Compliant Nanomanipulator with Nonlinear Stiffness

Precision Motion Control of Linear Motor Drive Systems for Micro/Nano-Positioning

Intelligent Tracking Error Prediction and Feedforward Compensation for Nanopositioning Stages with High-bandwidth Control

Dynamic modeling with feedforward/feedback control design for a three degree of freedom piezoelectric nanopositioning platform

Three-degrees-of-freedom Precision Stage

A Beam Flexure-Based Nanopositioning Stage Supporting Laser Direct-Write Nanofabrication

Orthogonality Measurement of Three-Axis Motion Trajectories for Micromanipulation Robot Systems

Design and calibration of the 6-DOF motion tracking system integrated on the Stewart parallel manipulator

Tracking Control of a Large Range 3D Printed Compliant Nano-Manipulator with Enhanced Anti-Windup Compensation

High-Precision Positioning Stage Control Based on a Modified Disturbance Observer