A Framework for a Large-Scale Machine Tool With Long Coarse Linear Axes Under Closed-Loop Volumetric Error Compensation
Soichi Ibaraki,Kohei Yuasa,Naoto Saito,Noriaki Kojima
DOI: https://doi.org/10.1109/tmech.2018.2796239
2018-04-01
IEEE/ASME Transactions on Mechatronics
Abstract:A large-scale machine tool is typically very inefficient in size, cost, and energy consumption. Some large parts only have a set of machining features, each of which is within a small local region, and their location should meet position and orientation tolerances. In such a machining application, as a more cost- and energy-effective alternative, this paper presents the concept of a portable machine tool, where a small machining platform, with the capability to machine each local machining feature in the required accuracy, is moved by long coarse linear axes. The coarse axes only perform the point-to-point positioning to each machining feature and fixed by servo control during the machining. They do not have sufficient positioning repeatability. To ensure the position/orientation accuracy of each machining feature without having highly repeatable coarse axes, this paper proposes the application of a tracking interferometer to measure all the error motions of coarse axes, and then to perform their compensation. This can be seen as a closed-loop feedback control for coarse axes using the tracking interferometer in the loop. The proposed concept is demonstrated by the experiments with its prototype using a six-degrees of freedom robot moved by two coarse linear axes.
automation & control systems,engineering, electrical & electronic, manufacturing, mechanical