Abstract:An accurate temperature analysis of electronic packaging requires an understanding of the thermal-transport parameters of the material. However, studies on the thermal conductivity of intermetallic compounds (IMCs) in micro-interconnect solder joints are scarce, particularly common IMCs forming in Cu-Sn systems, which seriously affect the precise prediction of the temperature field and thermal stress for electronic packaging structures. This work proposes a novel method to quantitatively measure the thermophysical parameters of Cu-Sn IMCs based on the dual-wavelength femtosecond laser timedomain thermoreflectance (TDTR) system. Cu-Sn diffusion couple samples were prepared using a reflow and aging process. Two layers of Cu6Sn5 and Cu3Sn IMCs formed at the interface with micron thickness, and the (001) crystal plane of Cu6Sn5 was the preferred orientation. The sensitivity of the experimental parameters to the measurement parameters affects the fitting accuracy. Therefore, before testing, the effects of the aluminum transducer thickness and pump laser modulation frequency on the phase signal sensitivity in the thermal conductivity measurements of Cu6Sn5 and Cu3Sn were analyzed to help select the specific experimental parameters. After testing, the thermal conductivities of Cu6Sn5 and Cu3Sn were 47.4 and 87.6 W/(m center dot K), respectively, which are slightly higher than the previous results because of the microstructure discrepancy caused by different material preparation techniques. Finally, the influence of the pump laser diameter, aluminum transducer thickness, and material specific heat on the measurement error of thermal conductivity for Cu6Sn5 and Cu3Sn was examined. The test errors of the Cu6Sn5 and Cu3Sn thermal conductivity were -6.8%similar to 4.6% and -7.1%similar to 4.4%, respectively. Overall, the TDTR technology can evaluate the thermal-transport characteristics of micron-scale intermetallic compounds in electronic packaging and guide the thermal design and reliability evaluations of electronic components.

Thermal Conductivity Determination of Conductor/insulator Composites by Fractal: Geometrical Tortuosity and Percolation

Fractal Analysis of Disordered Conductor–Insulator Composites with Different Conductor Backbone Structures Near Percolation Threshold

Mechanical Properties of Cermet Composites with Various Geometrical Tortuosity of Metal Phase: Fractal Characterization

Fractal model of thermal conductivity of GA-based composite phase change material with hole sub-model

The prediction of effective thermal conductivities perpendicular to the fibres of wood using a fractal model and an improved transient measurement technique

Fractal model for predicting effective thermal conductivity perpendicular to fibres of wood

Thermal properties of composite two-layer systems with a fractal inclusion structure

Bioinspired Functional Composites for Enhanced Thermally Conductivity via Fractal-Growth CuNP Fillers

Mullite Fibers/whiskers Hierarchical Porous Materials: Experimental Characterization and Fractal Model to Predict Thermal Conductivity

A Fractal Model For Effective Thermal Conductivity Of Dual-Porosity Media With Randomly Distributed Tree-Like Networks

Numerical Predictions of the Effective Thermal Conductivity for Needled C/C-SiC Composite Materials

Influence of filler topology on the thermal transport of composite materials based on similarity principle modeling: A cross-scale simulation study

Critical Assessment of Mass and Lattice Disorder in Thermal Conductivity Prediction for Medium and High Entropy Ceramics

Investigations on the Thermal Conductivity of Micro-Scale Cu-Sn Intermetallic Compounds Using Femtosecond Laser Time-Domain Thermoreflectance System

Thermal percolation in composite materials with electrically conductive fillers

Understanding the thermal conductivity of Diamond/Copper Composite by first-principles calculations

A Fractal Model for Predicting the Effective Thermal Conductivity of Liquid with Suspension of Nanoparticles

Evidence Of Anomalous Hopping And Tunneling Effects On The Conductivity Of A Fractal Pt-Film System

Phase Composition, Microstructure and Thermal Diffusivity of Cu/Si Composites Sintering Temperature Dependence

Percolation in metal-insulator composites of randomly packed spherocylindrical nanoparticles

Deformation Behavior and Microstructure Evolution of Graphene/copper Laminated Composites