Abstract:Improved switching characteristics were obtained from high-κ oxides AlOx, GdOx, HfOx, and TaOx in IrOx/high-κx/W structures because of a layer that formed at the IrOx/high-κx interface under external positive bias. The surface roughness and morphology of the bottom electrode in these devices were observed by atomic force microscopy. Device size was investigated using high-resolution transmission electron microscopy. More than 100 repeatable consecutive switching cycles were observed for positive-formatted memory devices compared with that of the negative-formatted devices (only five unstable cycles) because it contained an electrically formed interfacial layer that controlled 'SET/RESET' current overshoot. This phenomenon was independent of the switching material in the device. The electrically formed oxygen-rich interfacial layer at the IrOx/high-κx interface improved switching in both via-hole and cross-point structures. The switching mechanism was attributed to filamentary conduction and oxygen ion migration. Using the positive-formatted design approach, cross-point memory in an IrOx/AlOx/W structure was fabricated. This cross-point memory exhibited forming-free, uniform switching for >1,000 consecutive dc cycles with a small voltage/current operation of ±2 V/200 μA and high yield of >95% switchable with a large resistance ratio of >100. These properties make this cross-point memory particularly promising for high-density applications. Furthermore, this memory device also showed multilevel capability with a switching current as low as 10 μA and a RESET current of 137 μA, good pulse read endurance of each level (>105 cycles), and data retention of >104 s at a low current compliance of 50 μA at 85°C. Our improvement of the switching characteristics of this resistive memory device will aid in the design of memory stacks for practical applications.

Forming-free, ultra-high on-state current, and self-compliance selector based on titanium-doped NbOx thin films

Resistive switching in Nb-doped SrZrO3 memory films: An effective approach with a Cu modulation layer

Memory Switching and Threshold Switching in a 3D Nanoscaled NbO X System

Nb1-xO2 Based Universal Selector with Ultra-high Endurance (> 10(12)), High Speed (10ns) and Excellent V-th Stability

Characteristics of Nb-doped SrTiO3 and HfO2-based Selector Devices

The co-improvement of selectivity and uniformity on NbOx-based selector by Al-doping

Ultrahigh Uniformity and Stability in NbO x -Based Selector for 3-D Memory by Using Ru Electrode

Improved Performance of NbOx Resistive Switching Memory by In-Situ N Doping

Conduction mechanism of a TaO(x)-based selector and its application in crossbar memory arrays

Forming-free and Self-Rectifying Resistive Switching of the Simple Pt/TaOx/n-Si Structure for Access Device-Free High-Density Memory Application.

Simulation Method for Forming and Switching Processes of NbO2-based Selector

High-Performance LiNbO3 Domain Wall Memory Devices with Enhanced Selectivity via Optimized Metal–Semiconductor Contact

Investigating Selectorless Property within Niobium Devices for Storage Applications

Anatomy of high-uniform unidirectional volatile switching behavior in SiO2/TiO2-based selection device

Performance‐Enhancing Selector Via Symmetrical Multilayer Design

Improved uniformity and threshold voltage in NbO x -ZrO 2 selectors

A high-speed MIM resistive memory cell with an inherent vanadium selector

Modulating the Filament Rupture Degree of Threshold Switching Device for Self-Selective and Low-Current Nonvolatile Memory Application

Hafnium nanocrystals observed in a HfTiO compound film bring about excellent performance of flexible selectors in memory integration

Titanium–tungsten Nanocrystals Embedded in a SiO2/Al2O3gate Dielectric Stack for Low-Voltage Operation in Non-Volatile Memory

Impact of electrically formed interfacial layer and improved memory characteristics of IrOx/high-κx/W structures containing AlOx, GdOx, HfOx, and TaOx switching materials