Evaluation of Three Sample Introduction Systems for Impurity Analysis of an Ultrapure Reagent Using a Scanning Mobility Particle Sizer

Alice Chinghsuan Chang,Shu-Han Hung,Yi-Hsuan Pan,Yi-Hung Liu,Wei-En Fu,Yu-Ju Lin,Fang-hsin Lin

DOI: https://doi.org/10.1021/acsomega.1c07168

IF: 4.1

2022-04-15

ACS Omega

Abstract:The semiconductor industry continues to shrink the device sizes while applying more complex shapes and using diverse materials, which requires parallel improvements in the quality of ultrapure reagents. The need for ultrapure reagents has led to ever-higher demands for the performance of analytical instruments used to detect ultratrace impurities. In this study, nonvolatile impurities in ultrapure reagents were quantified using a scanning mobility particle sizer (SMPS). The performances of three different sample introduction systems, i.e., an electrospray (ES), an aerosol generator with a heating chamber and a Nafion desolvation membrane (NB-II), and a MicroMist nebulizer with a heated cyclonic spray chamber and a three-stage Peltier-cooled desolvation system (MM-APEX), were evaluated for the lower limit of detection of a SMPS. The MM-APEX equipped with the SMPS was able to detect NaCl additives at a concentration of 100 parts per trillion (ppt, ng/L) in ultrapure water, which was approximately 10- and 10-fold lower than those of ES and NB-II, respectively. The practical application of MM-APEX with the SMPS for commercial isopropanol samples was also studied. The results clearly demonstrate that the impurity concentrations presented by the NaCl-equivalent concentrations among different sources of isopropanol were at the ppt to parts-to-billion (ppb) scale. The SMPS system equipped with MM-APEX is capable of recognizing impurities with concentrations ranging from tens ppt to thousands of parts per million (ppm), which is beneficial for an ultratrace analysis of nonvolatile impurities in semiconductor process chemicals.

chemistry, multidisciplinary

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the need for high - sensitivity detection of ultra - trace impurities in ultrapure reagents in the semiconductor industry. With the continuous shrinking of semiconductor device sizes and the increasing complexity of shapes, the quality requirements for ultrapure reagents are getting higher and higher, which requires corresponding analytical instruments to have higher performance in detecting ultra - trace impurities. In this paper, a Scanning Mobility Particle Sizer (SMPS) was used to quantify non - volatile impurities in ultrapure reagents, and the effects of three different sample introduction systems (i.e., Electrospray (ES), an aerosol generator with a heating chamber and a Naﬁon desolvation membrane (NB - II), and a MicroMist nebulizer (MM - APEX) equipped with a heated cyclone injection chamber and a three - stage Peltier - cooled desolvation system) on the lower detection limit of SMPS were evaluated. The research aims to find the sample introduction system most suitable for the detection of ultra - trace non - volatile impurities to meet the industrial needs for online real - time monitoring that is fast, highly sensitive and applicable to multiple impurity types.

Evaluation of Three Sample Introduction Systems for Impurity Analysis of an Ultrapure Reagent Using a Scanning Mobility Particle Sizer

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

A demountable nanoflow nebulizer for sheathless interfacing nano-high performance liquid chromatography with inductively coupled plasma mass spectrometry

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

Nebulization Swab Assisted Photoionization Tandem Miniaturized Ion Trap Mass Spectrometry for On-Site Analysis of Nonvolatile Compounds.

Study On The Performance Promotion Of The Surface Plasmon Resonance Analytical System

A Compact and Low-Cost Miniaturized Analysis System Composed of Microchip Electrophoresis and Chemiluminescence Detection Manipulated by a Simple Subatmospheric Pressure Fluid-Driven Device

Factors That Govern Sub-3 Nm Particle Measurements in an Airmodus® PSM and a TSI® DEG–SMPS

A Pressure-Driven Capillary Electrophoretic System with Injection Valve Sampling.

Comparison of Sampling Techniques for the Analysis of Particulate Metal Impurities in Gases

Method Development for Simultaneous Determination of Transition (Au, Ag, Cd, Cu, Mn, Ni, Pb, Zn) and Noble (Pd, Pt, Rh) Metal Volatile Species by Microwave-Induced Plasma Spectrometry Using Ultrasonic Micronebulizer Dual Capillary Sample Introduction System

On-Line Metal Concentration Measurement at an Ultra-Trace Level in DIW by Solid Phase Extraction Method Coupled with ICP-MS

Development of an achiral supercritical fluid chromatography method with ultraviolet absorbance and mass spectrometric detection for impurity profiling of drug candidates. Part I: Optimization of mobile phase composition

Coupling of an electrodialyzer with inductively coupled plasma mass spectrometry for the on-line determination of trace impurities in silicon wafers after surface metal extraction

Drug impurity profiling by capillary electrophoresis/mass spectrometry using various ionization techniques

Development of an Automatic Column Chromatography Separation Device for Metal Isotope Analysis Based on Droplet Counting

High-Throughput Quantitative Analysis by Desorption Electrospray Ionization Mass Spectrometry

Measurement of NOx Concentration at Ppb Level in High-Purity Gases Based on Chemiluminescence Method

Development and Applications of Paper-Based Electrospray Ionization-Mass Spectrometry for Monitoring of Sequentially Generated Droplets.

Thermospray nebulizer as sample introduction technique for microwave plasma torch atomic emission spectrometry

Analysis of impurity profiling of arbekacin sulfate by ion-pair liquid chromatography coupled with pulsed electrochemical detection and online ion suppressor-ion trap-time off light mass spectrometry