Abstract:In this paper, a new type of six-degrees of freedom (DOF) flexible parallel mechanism (FPM) is presented. This type of parallel mechanism possesses several favorable properties: (1) its number of DOFs is independent of the number of serial chains which make up the mechanism; (2) it has no kinematical singularities; (3) it is designed to move on rails, and therefore its workspace is much larger than that of a conventional parallel manipulator; and (4) without changing the number of DOFs and the kinematics of the mechanisms, the number of the serial chains can be reconfigured according to the needs of the tasks. These properties make the mechanism very preferable in practice, especially for such tasks as joining huge ship blocks, in which the manipulated objects vary dramatically both in weights and dimensions. Furthermore, the mechanism can be used as either a fully actuated system or an underactuated system. In the fully actuated case, the mechanism has six DOF motion capabilities and manipulation capabilities. However, in the underactuated case, the mechanism still has six DOF motion capabilities, but it has only five DOF manipulation capabilities. In this paper, both the inverse and forward kinematics are studied and expressed in a closed form. The workspace and singularity analysis of the mechanism are also presented. An example is presented to illustrate how to calculate the kinematics of the mechanism in both fully-actuated and underactuated cases. Finally, an application of such a mechanism to manufacturing industry is introduced.

Kinematic Analysis and Optimization of a Novel 6-DOF Motion Simulator Mechanism.

Conceptual Design and Kinematic Analysis of a New 6-DOF Parallel Mechanism

Stiffness Modeling and Optimization Analysis of a Novel 6-DOF Collaborative Parallel Manipulator.

Design And Kinematic Analysis Of A Novel Flight Simulator Mechanism

Kinematics and Optimization of a Novel 4-DOF Two-Limb Gripper Mechanism

Development of a Novel 6-DOF Hybrid Serial-Parallel Mechanism for Pose Adjustment of Large-Volume Components

Kinematic analysis of a flexible six-DOF parallel mechanism

Kinematics and Dynamics Simulation Analysis of a 3-DOF Parallel Mechanism for Application in Hybrid Machine

Design and Dynamics Modeling of a Novel 2R1T 3-DOF Parallel Motion Simulator

Kinematic Analysis of a Two Degree-of-freedom Parallel Manipulator

Dynamic Model of a 6-DOF Parallel Mechanism with Hooke's Joints at Both Chain Ends

Kinematic and dynamic analysis of a 3-DOF parallel mechanism

Kinematic design and analysis of a 6-DOF spatial five-Bar linkage

Design And Kinematics Of A Novel Three Dof Parallel Manipulator

Kinematic Analysis and Optimal Design of a Novel Parallel Pointing Mechanism

Modeling and simulation for a novel 6-DOF parallel manipulator

Kinematic Analysis of A Novel Type of 6-DOF Hybrid Serial-parallel Manipulator

Kinematics and Singularity of a 4-DOF Parallel Mechanism with Passive Spherical Joints

Kinematic Analysis and Design of a Novel 6-Degree of Freedom Parallel Robot

Study on a novel 6-DOF combinational parallel manipulator

Kinematic and dynamic modelling of a novel two-DOF direct-drive planar parallel manipulator