Research on microstructure, mechanical property and wear mechanism of AlCoCrFeNi/WC composite coating fabricated by HVOF
Qiang Da,Jia-jie Kang,Guo-zheng Ma,Yong-kuan Zhou,Zhi-qiang Fu,Li-na Zhu,Ding-shun She,Hai-dou Wang
DOI: https://doi.org/10.1016/j.triboint.2024.110149
IF: 5.62
2024-08-31
Tribology International
Abstract:In this study, HVOF spraying technology was utilized to prepare AlCoCrFeNi/WC composite coatings with varying WC content on 40CrMnMoA steel substrate. The microstructure, elemental distribution, phase structure and chemical valence states of wear scratches of the composite coatings were analyzed using the SEM, EDS, XRD and XPS. Microhardness was measured using single-point digital microhardness tester, while nanohardness and elastic modulus were determined using a nano-indenter. The bonding strength of the composite coatings was evaluated using a tensile tester. Friction and wear tests were conducted to assess the wear behavior of the composite coatings. The results indicated that the microstructure, microhardness, nanohardness and elastic modulus of AlCoCrFeNi HEA coating increased with the addition of WC, attributed to the hard phase effects of WC. However, the bonding strength first decreased and then increased. Compared to the W 0 coating, the wear rates of the other composite coatings decreased by 30.5 %, 46.1 %, 65.3 %, and 82.1 %, respectively, which demonstrating that the effect strengthening of WC. After the friction and wear tests, the wear mechanism of the W 0 and W 1 coatings represents adhesive wear, abrasive wear and severe oxidation wear. In contrast, the W 2 and W 3 coatings exhibited slight adhesive wear, slight abrasive wear and slight oxidation wear, while the W 4 coating showed the slightest abrasive wear, the slightest adhesive wear and the slightest oxidation wear.
engineering, mechanical