Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

A 20-Ghz Di Ff Erential Push-Push VCO for 60-Ghz Frequency Synthesizer Toward 256 QAM Wireless Transmission in 65-Nm CMOS

A 60GHz voltage-controlled oscillator with a 3.6GHz tuning range in 180nm CMOS technology

A 20 GHz Push-Push Voltage-Controlled Oscillator for a 60 GHz Frequency Synthesizer

A Superharmonic Injection based G-band Quadrature VCO in CMOS

A 1.8-V 6/9-Ghz Reconfigurable Dual-Band Quadrature LC VCO in SiGe BiCMOS Technology

A 20 Ghz Push-Push Voltage-Controlled Oscillator Using Second-Harmonic Peaking Technique For A 60 Ghz Frequency Synthesizer

A ${\hbox{70}}{\hbox{–}} {\Hbox{78-}}{\Hbox{ghz}}$ Integrated CMOS Frequency Synthesizer for $W$ -Band Satellite Communications

A 1.8-V 6/9-GHz switchable dual-band quadrature LC VCO in SiGe BiCMOS technology

A ${\hbox{70}}{\hbox{–}} {\Hbox{78-}}{\Hbox{ghz}}$ Integrated CMOS Frequency Synthesizer for $W$-Band Satellite Communications

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

Design of a 60 GHz, 11.7% Tuning-Range Voltage-Controlled Oscillator in 65 Nm CMOS Technology

A 190 GHz VCO with Transformer-Based Push–Push Frequency Doubler in 40 nm CMOS

A 194.9dbc/hz FoM and 6.8-to-11.6ghz Quad-Core Dual-Mode Class-F VCO Featuring Wideband Flicker Noise Suppression

A 5.6∼8.2ghz QVCO with a New DCCA Circuit

An 8.2 GHz triple coupling low-phase-noise class-F QVCO in 65nm CMOS.

A 56-To-66 Ghz Quadrature Phase-Locked Loop With A Wide Locking Range Divider Chain In 65nm Cmos

A 5.6 Similar To 8.2ghz Qvco With A New Dcca Circuit

An 8-12Ghz Class-F3 VCO with Multi-LC Tank in 28nm CMOS.

Design of a 4.224GHz Quadrature LC-VCO

A 180 GHz differential Colpitts VCO in 65 nm CMOS

A 28-nm Dual-Mode Explicit Class-F23 VCO With Low-Loss CM Return Path Achieving 70–400-kHz 1/f3 PN Corner Over 4.9–7.3-GHz TR