Abstract:Silver nanowire (Ag NW) films are the promising next-generation flexible, transparent conductors, but their transport properties are greatly deteriorated by the insulating polyvinylpyrrolidone (PVP) layer wrapping on the Ag NWs. Herein, we report a plasma treatment strategy to completely remove the PVP layer and meanwhile limitedly weld the Ag NW film at the NW/NW junctions to improve the film's carrier transport properties while not affecting its transparency. Particularly, we found that the dual functions of the removal of the PVP layer and self-limited welding can be achieved for a series of commonly used plasmas, e.g., O2 plasma, H2-Ar plasma (1:9 in volume), and N2 plasma. Theoretical simulations reveal that the self-limited welding is caused by the focusing of light (emitted during plasma generation) at the NW/NW junctions, which thermally activates silver atoms and drives recrystallization therein. With a cleaned surface and welded nature, the plasma-treated Ag NW film shows largely improved conductivity and high flexibility, greatly facilitating its application as a high-performance flexible transparent heater (cycling stability, >40 cycles of heating/cooling; temperature rising rate, 112 °C within 30 s at 8 V). Moreover, the plasma-treated Ag NW can also serve as a basic electrode for a stacked electron-only device of Ag NW film/8-hydroxyquinoline/Ag electrode, improving its current collection efficiency by 5.47 times. These results suggest that plasma treatment can greatly benefit the applications of Ag NW film.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c03137?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c03137</a>.Characterizations of the Ag NWs synthesized; Raman spectra for pure PVP, PVP-wrapped Ag NWs, and N2 plasma-treated Ag NWs; SEM images for single NW/NW junctions upon N2 plasma treatment for different durations; HRTEM and SEM images of single NW/NW junctions upon H2-Ar (1:9) plasma treatment and O2 plasma treatment; models used for FDTD simulations; electric field distribution and heat distribution around two perpendicularly center-crossed Ag NWs under 590 and 805 nm light illuminations; sheet resistance and transmittance (@550 nm) for the Ag NW film before and after N2 plasma treatment; SEM image of the Ag NW film used for the flexibility test; SEM image of the Ag NW film in a transparent heater; equivalent electric circuit of the electron-only device; summarization of electric field strength and heat concerted on two perpendicularly center-crossed Ag NWs under different light illuminations (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c03137/suppl_file/an0c03137_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Direct Room Temperature Welding and Chemical Protection of Silver Nanowire Thin Films for High Performance Transparent Conductors

Efficient Welding of Silver Nanowires embedded in a Poly(vinylidene fluoride) Film for Robust Wearable Electronics

Rapid Electrochemical Cleaning Silver Nanowire Thin Films For High-Performance Transparent Conductors

Plasma Cleaning and Self-Limited Welding of Silver Nanowire Films for Flexible Transparent Conductors

Mixed Polyvinyl Pyrrolidone Hydrogel-Mediated Synthesis of High-Quality Ag Nanowires for High-Performance Transparent Conductors

Electrochemical Redox In-Situ Welding of Silver Nanowire Films with High Transparency and Conductivity

Conductivity Enhancement of Silver Nanowire Networks Via Simple Electrolyte Solution Treatment and Solvent Washing

13.1: Stability Enhancement of Silver Nanowire Transparent Conductors Via Self‐Assembled Monolayer

Comprehensive Stability Improvement of Silver Nanowire Networks via Self-Assembled Mercapto Inhibitors

Fabrication of Embedded Silver Nanowires on Arbitrary Substrates with Enhanced Stability Via Chemisorbed Alkanethiolate.

Preparation and Cold Welding of Silver Nanowire Based Transparent Electrodes with Optical Transmittances >90% and Sheet Resistances <10 Ohm/sq.

Room temperature high-efficiency welding of an ultra-long silver nanowire network for flexible transparent electrodes

Coating-free, air-stable silver nanowires for high-performance transparent conductive film

Transferable Self-Welding Silver Nanowire Network As High Performance Transparent Flexible Electrode

Highly Transparent and Thermal-Stable Silver Nanowire Conductive Film Covered with ZnMgO by Atomic-Layer-deposition

Fabrication of silver nanowire transparent electrodes at room temperature

Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Silver Nanowire Network for Flexible Transparent Electrodes Based on Spray Coating at a Low DC Electric Field and Plasma Treatment

Solvent Welding-Based Methods Gently and Effectively Enhance the Conductivity of a Silver Nanowire Network

Halide Welding for Silver Nanowire Network Electrode

Cohesively Enhanced Electrical Conductivity and Thermal Stability of Silver Nanowire Networks by Nickel Ion Bridge Joining