Abstract:The aim of this study was to investigate whether the coating of titanium (Ti) implants with hydroxyapatite (HA) might create a better fixation when titanium implants are implanted into a gap. In each of 16 rats, the medullary cavity of both femurs was entered by an awl from the trochanteric area. With steel burrs it was successively reamed to a diameter of 1.5 mm. In a random manner the proximal part of the cavity in half of the bones was reamed once again to a diameter of 2.0 mm. Nails with a diameter of 1.5 mm and a length of 34 mm were then inserted into the medullary cavity of these bones with press fit at the distal half and a gap to the bone in the proximal half. In the remaining bones the whole medullary canal was reamed to a diameter of 2.0 mm, and nails with a diameter of 2.0 mm and a length of 34 mm were introduced. In all cases, either a pure Ti nail or a Ti nail entirely plasma sprayed with HA was used in a random manner. The surface roughness of the pure Ti was characterized by Ra 2.6 microm and Rt 22 microm. Ra of HA was 7.5 microm and Rt 52 microm. At sacrifice after 16 weeks, both femurs were dissected free from soft tissues and then immersed in fixative. A specimen slice of about 5 mm in thickness was prepared from the subtrochanteric region with a water-cooled band saw. Sample preparation for undecalcified tissue followed the internal guidelines at the laboratories of the Department of Biomaterials/Handicap Research. Generally, bone contact to the nails with HA coating was more predictable than was bone contact to the Ti nails. But due to rather large variations in bone contact between the samples, statistical analyses revealed non-significant differences between the 4 groups (p = 0.083). There were no significant differences between Ti and HA coated nails of 2.0 mm (p = 0.633), nor between Ti and HA coated nails of 1.5 mm (p = 0.924). The pooled values for the 2.0 mm nails showed significantly higher bone bonding contact than the pooled values of the 1.5 mm nails (p = 0.011). Our results, then, indicate that bone bonding contact to implants with a loose fit insertion is less predictable than in press fit insertion, and HA coating seemed to be more predictable than pure Ti. However, due to large variations between the samples, the differences did not reach significant levels.

A Comparison of Micro-Ct and Histomorphometry for Evaluation of Osseointegration of PEO-coated Titanium Implants in a Rat Model

Biomechanical comparison of biomimetically and electrochemically deposited hydroxyapatite-coated porous titanium implants.

Effects of biomimetically and electrochemically deposited nano-hydroxyapatite coatings on osseointegration of porous titanium implants.

Analysis of trabecular bone around the implant by Micro-CT and the corresponding choice of ROI

In Vivo Comparison of Bone Formation on Titanium Implant Surfaces Coated with Biomimetically Deposited Calcium Phosphate or Electrochemically Deposited Hydroxyapatite

Effect of Thin Nano-Hydroxyapatite Coating on Implant Osseointegration in Ovariectomized Rats

Effects of magnesium-substituted nanohydroxyapatite coating on implant osseointegration.

Bone Responses to Rough Titanium Implants Coated with Biomimetic Ca-P in Rabbit Tibia.

Biological and Biomechanical Behavior of Titanium Implants with Fluoridated Hydroxyapatite Coatings

Bone Responses to Titanium Implants Surface-Roughened by Sandblasted and Double Etched Treatments in a Rabbit Model.

Histomorphometrical And Clinical Study Of Connective Tissue Around Titanium Dental Implants With Porous Surfaces In A Canine Model

Comparison of three-dimensional digital analyses and two-dimensional histomorphometric analyses of the bone-implant interface

Enhanced Osseointegration of Hierarchical Micro/Nanotopographic Titanium Fabricated by Microarc Oxidation and Electrochemical Treatment.

Hydroxyapatite and carbon coatings for fixation of unloaded titanium implants

Comparative study in vivo of the osseointegration of 3D-printed and plasma-coated titanium implants

Superior Biocompatibility and Osteogenic Efficacy of Micro-Arc Oxidation-Treated Titanium Implants in the Canine Mandible

Osseointegration and Histopathological Evaluation of Titanium-Titanium Diboride Composite Compared to Pure Titanium Implant Materials Prepared by Powder Metallurgy (In Vivo Study)

Early osseointegration of implants with cortex-like TiO2 coatings formed by micro-arc oxidation: A histomorphometric study in rabbits

Evaluation of Biological Properties of Electron Beam Melted Ti6al4v Implant with Biomimetic Coating in Vitro and in Vivo

Titanium micro-nano textured surface with strontium incorporation improves osseointegration: an in vivo and in vitro study

Bone ingrowths to press-fit and loose-fit implants: comparisons between titanium and hydroxyapatite