Abstract:In long-term observations, the attitude drift of a coil vector magnetometer caused by mechanical deformation will directly affect the accuracy of magnetic direction measurements. To solve this problem, we propose a characterization model and calibration method for the measurement error associated with attitude drift. The proposed model uses an attitude matrix to define a mapping from the unmeasurable characteristic angle to the measurable magnetometer attitude. We propose a new coordinate system to establish a characterization model linking the characteristic angle of the magnetometer attitude to the measurement error of the magnetic direction, thereby permitting quantitative analysis of the attitude drift and real-time suppression of its negative influence on the measurement accuracy without complex manual operations. The proposed model shows that in the presence of small attitude changes, the measurement error of the magnetic inclination is mainly determined by the south–north nonlevelness of magnetometer, and the error of magnetic declination is mainly determined by the magnetometer orientation and east–west nonlevelness. Our simulations show that when the east–west nonlevelness, south–north nonlevelness, and orientation angle of the magnetometer are , , and , respectively, the measurement errors (baseline shift) of the magnetic inclination and declination are and , respectively. To ver- fy the results, we designed an experimental platform and conducted a comparative experiment. The results show that in the presence of the aforementioned attitude parameters, the measurement errors of the magnetic inclination and declination can be reduced by 97.8% and 88.6%, respectively, through error calculation and baseline correction.

Magnetic Suspension Dynamic Calibration Device of Measurement System for Dynamic Characteristics of Sliding Bearings

Dynamic Calibration and Verification Device of Measurement System for Dynamic Characteristic Coefficients of Sliding Bearing.

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Improving calibration accuracy of a vibration sensor through a closed loop measurement system.

Study on Calibration Method and System Error Compensation of Balancing Machines

Automatic Measurement of Stiffness and Damping of Active Magnetic Bearings

On-line Measurement of Supporting Characteristics of an Active Magnetic Levitations with Unknown Transfer Function

Auto balance of active magnetic bearings for rotor support system by means of unbalance identification

Precision tilting platform used for static calibration of accelerometers

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Simulation evaluation of dynamic characteristic identification accuracy of sliding bearing considering test error

On-line Identification Based Unbalance Vibration Control With Less Regard to Rotor Speed in Active Magnetic Bearings Supporting Rotor System

Characterization and Calibration of Measurement Error Associated With Attitude Drift of a Coil Vector Magnetometer

A novel dynamic calibration method for dynamic characteristics testing of hydrodynamic journal bearing

A Disturbance Compensation Control Strategy for Rotational Speed Standard Device Based on AMB System

Identification method of accelerometer nonlinear error model coefficients with vibration rectification

Identification Of The Dynamic Coefficients Of Journal Active Magnetic Bearing

Analysis and Experimental Study on Uncertain Fault of Active Magnetic Bearing Displacement Sensor

Investigation into Cage Slip and Vibration Behavior of Rolling Bearing Based on Weak Magnetic Detection

An Enhanced Dynamic Simulation Model of a Hybrid Magnetic Bearing Taking Account of the Sensor Noise

Nano-Level Instrumentation For Analyzing The Dynamic Accuracy Of A Rolling Element Bearing