Abstract:Electrical conductivity of composites is dramatically (>5 orders of magnitude) altered when the fiber alignment is switched from random to high alignment. Using direct ink write printing and controlling a single parameter (velocity ratio), conductive or insulative specimens are fabricated from the same composite ink. Applications of the 3D printed, multifunctional composites such as self‐sensing and localized heating are explored. Prior studies on carbon‐filler based, conductive polymer composites have mainly investigated how conductive filler morphology and concentration can tailor a material's electrical conductivity and overlooks the effects of filler alignment due to the difficulty to control and quickly quantify the filler alignment. Here, direct ink write 3D printing's unique ability is utilized to control carbon fiber alignment with a single process parameter, velocity ratio, to instantaneously activate or deactivate the electrical network in composites. Maximum electrical conductivity is achieved by randomly aligning carbon fibers that enhances the chance of direct fiber‐to‐fiber contact and, thus, activating the electrical network. However, aligning the fibers by increasing the velocity ratio disrupts the electrical network by minimizing fiber‐to‐fiber contact that resulted in a drastic decrease in electrical conductivity by as much as five orders of magnitude in both short and long carbon fiber composites. With this study, this study demonstrates that electrically conductive or insulative composites can be fabricated sequentially with a single ink. This novel ability to instantaneously control the electrical conductivity of carbon fiber reinforced composites allow to directly embed conductive pathways into designs to 3D print multifunctional composites that are capable of localized heating and self‐sensing.

Direct Ink Writing for High-Efficiency Microwave Attenuation with Nanofibers Alignment

Peripheral-photoinhibition-based Direct Laser Writing with Isotropic 30 Nm Feature Size Using a Pseudo 3D Hollow Focus

Laser Direct Writing Using Submicron-Diameter Fibers.

Direct Writing of Submicron Lines Using the Micro-and Nanofiber Pens

Microstructure Control of Highly Oriented Short Carbon Fibres in SiC Matrix Composites Fabricated by Direct Ink Writing

Direct Ink Writing of Continuous SiO 2 Fiber Reinforced Wave-Transparent Ceramics

Acoustic-assisted DLP 3D Printing Process for Carbon Nanofiber Reinforced Honeycomb Structures

Vertical Interphase Enabled Tunable Microwave Dielectric Response in Carbon Nanocomposites

In Situ Electrical Network Activation and Deactivation in Short Carbon Fiber Composites via 3D Printing

Microstructure and mechanical properties of continuous carbon fiber-reinforced SiC ceramic composite fabricated by direct ink writing

Optimization and Characterization of Preceramic Inks for Direct Ink Writing of Ceramic Matrix Composite Structures

Direct Ink Writing of Chopped Carbon Fibers Reinforced Polymer-derived SiC Composites with Low shrinkage and High Strength

Preparation and Mechanical Performance of SiCw/geopolymer Composites Through Direct Ink Writing

A new 3D printing strategy by enhancing shear-induced alignment of gelled nanomaterial inks resulting in stronger and ductile cellulose films

Embedded Direct Ink Writing 3D Printing of UV Curable Resin/Sepiolite Composites with Nano Orientation

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Electric Field-Induced Orientation of Silicon Carbide Whiskers for Directional and Localized Thermal Management

Ultrahigh thermal conductive polymer composites by the 3D printing induced vertical alignment of carbon fiber

Ultrafast Laser 3D Nanolithography of Fiber-Integrated Silica Microdevices

Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures